New Updated Cisco MIT 650-042 Real Exam Download 61-70

EnsurepassQUESTION 61 Which of the following statements is true regarding alarms and traps?   A trap is not buffered in memory. An alarm is a notification is sent from the SNMP agent on the Cisco ASR 5000 to an external SNMP manager. A trap is stored on the flash card of the management module on the Cisco ASR 5000. An alarm is removed from memory when the condition that created it is cleared.   Correct Answer: D     QUESTION 62 When you are troubleshooting hardware, what Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 51-60

EnsurepassQUESTION 51 Which of the following statement is true regarding the PMM-Connected state?   Paging is needed in order to reach the mobile station, such as for signaling. The mobile station performs the routing area update procedure when RAI in the mobility management system information changes. There is no communication between the mobile station and the 3G SGSN. The mobile station performs a routing area update if the routing area changes.   Correct Answer: D     Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 41-50

EnsurepassQUESTION 41 Which of the following statement is true regarding trace logging?   Trace logging cannot affect performance. The output from trace logging is displayed in the CLI session where the trace was started. It can be used to view logging information about a call that is being established or is about to be established. Trace can be started from a particular session, based on call identification.   Correct Answer: C     QUESTION 42 Which of the following statements Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 31-40

EnsurepassQUESTION 31 What is the show radius authentication servers detail command used for?   To obtain some statistics about RADIUS operation. To get multiple counters that are related to the MAP operations of the SGSN. To obtain a summary of the RADIUS server or servers status. To view mobility statistics for the SGSN.   Correct Answer: C     QUESTION 32 What is the subsystem task that is responsible for performing a centralized IMSI lookup?   MME Manager Session Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 21-30

EnsurepassQUESTION 21 Which types of Cisco ASR 5000 services are needed for communication between a Serving Gateway and Packet Data Network Gateway?   SGW and GTPU EGTP and SGW GTPU and PGW EGTP and GTPU   Correct Answer: D     QUESTION 22 Which bus interconnects RCCs and line cards?   TDM bus redundancy bus control bus system management bus   Correct Answer: B     QUESTION 23 Which of these statements is true regarding the PMM-ldle state?   Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 11-20

EnsurepassQUESTION 11 For which mobility management state is the location of the mobile station tracked by the serving RNC?   PMM-Detached PMM-ldle and PMM-Detached PMM-ldle PMM-Connected   Correct Answer: D     QUESTION 12 How many VLAN tags may contain each physical port on an Ethernet 1000 me card?   up to 124 up to 1820 up to 1024 up to 2000   Correct Answer: C     QUESTION 13 Which reference point supports communication between the eNodeB and Read more [...]

New Updated Cisco MIT 650-042 Real Exam Download 1-10

EnsurepassQUESTION 1 Which logical interface is the communications path between the SGSN and the Cisco GGSN?   IuPS interface Gi interface Gn interface MAP interface   Correct Answer: C     QUESTION 2 What is the HLR configuration imsi starts-with command used for?   to specify the IMSI number IMSI analysis to change the IMSI number to display point-code definition   Correct Answer: A     QUESTION 3 What is the show alarm outstanding verbose command Read more [...]

Latest 650-042 MITFE Real Exam Download 51-60

EnsurepassQUESTION 51 Which of the following statement is true regarding the PMM-Connected state?   A.      Paging is needed in order to reach the mobile station, such as for signaling. B.      The mobile station performs the routing area update procedure when RAI in the mobility management system information changes. C.      There is no communication between the mobile station and the 3G SGSN. D.      Read more [...]

Latest 650-042 MITFE Real Exam Download 41-50

EnsurepassQUESTION 41 Which of the following statement is true regarding trace logging?   A.      Trace logging cannot affect performance. B.      The output from trace logging is displayed in the CLI session where the trace was started. C.      It can be used to view logging information about a call that is being established or is about to be established. D.      Trace can be started from Read more [...]

Latest 650-042 MITFE Real Exam Download 31-40

EnsurepassQUESTION 31 What is the show radius authentication servers detail command used for?   A.      To obtain some statistics about RADIUS operation. B.      To get multiple counters that are related to the MAP operations of the SGSN. C.      To obtain a summary of the RADIUS server or servers status. D.      To view mobility statistics for the SGSN.   Correct Answer: C   Read more [...]

Latest 650-042 MITFE Real Exam Download 21-30

EnsurepassQUESTION 21 Which types of Cisco ASR 5000 services are needed for communication between a Serving Gateway and Packet Data Network Gateway?   A.      SGW and GTPU B.      EGTP and SGW C.      GTPU and PGW D.      EGTP and GTPU   Correct Answer: D     QUESTION 22 Which bus interconnects RCCs and line cards?   A.      TDM bus B.      Read more [...]

Latest 650-042 MITFE Real Exam Download 11-20

EnsurepassQUESTION 11 For which mobility management state is the location of the mobile station tracked by the serving RNC?   A.      PMM-Detached B.      PMM-ldle and PMM-Detached C.      PMM-ldle D.      PMM-Connected   Correct Answer: D     QUESTION 12 How many VLAN tags may contain each physical port on an Ethernet 1000 me card?   A.      Read more [...]

Latest 650-042 MITFE Real Exam Download 1-10

EnsurepassQUESTION 1 Which logical interface is the communications path between the SGSN and the Cisco GGSN?   A.      IuPS interface B.      Gi interface C.      Gn interface D.      MAP interface   Correct Answer: C     QUESTION 2 What is the HLR configuration imsi starts-with command used for?   A.      to specify the IMSI number B.      Read more [...]