Which command should you issue first to configure EIGRP for IP?
A. ip eigrp routing
B. router eigrp process-id
C. ip eigrp autonomous-system-number
D. router eigrp autonomous-system-number
Correct Answers: D
Which statement is true about the implementation of IPv6 in an already existing IPv4 network?
A. IPv6 can be routed using the same routing protocol versions as IPv4
B. A router routing for IPv6 and IPv4 must convert IPv4 packets to IPv6 packets to route them.
C. IPv4 and IPv6 networks can be routed simultaneously.
D. Only OSPF version 3 can be utilized for routing IPv4 and IPv6.
Correct Answers: C
Which statement is correct about OSPFv3?
A. Authentication is supported through IPSec.
B. Neighbor discovery has been enhanced over OSPFv2 to allow multiple adjacencies.
C. Multiple DRs are allowed on a broadcast segment.
D. Point-to-multipoint mode is no longer an option for interfaces.
Correct Answers: A
Refer to the exhibit. What statement is true about the configuration output?
A. Updates that are received from BGP neighbor 192.168.28.1 and that pertain to network 10.30.0.0/16 will be preferred over the default local preference settings.
B. Updates that are going to BGP neighbor 192.168.28.1 and that pertain to network 10.30.0.0/16 will be sent with a local preference value of 110.
C. Traffic that is coming from 10.30.0.0/16 will be routed through BGP neighbor 192.168.28.1 if all other BGP neighbor connections maintain their default metrics.
D. If all other BGP neighbor connections maintain their default settings, traffic that is coming from 10.30.0.0/16 will not prefer the path through BGP neighbor 192.168.28.1.
Correct Answers: A
Refer to the exhibit. A network administrator has configured DHCP services on the router as shown. DHCP clients connected to the FastEthernet0/0 interface are working properly. DHCP clients connected to the FastEthernet0/1 interface are not receiving addresses. Which two statements contain recommendations that will solve the problem? (Choose two.)
A. The ip helper-address 10.0.0.1 command should be issued so that the address can be added to the FastEthernet0/0 configuration.
B. The ip helper-address 10.0.0.1 command should be issued so that the address can be added to the FastEthernet0/1 configuration.
A. C.A second DHCP pool for network 10.10.0.0/24 should be configured.
C. The network shown in the output under the ip dhcp pool Central command should be changed to network 10.10.0.0 with a mask of 255.255.255.0.
D. An ip dhcp excluded-address global configuration command for network 10.10.0.0/24 should be issued.
Correct Answers: CE
Which two BGP best-path selection statements are true? (Choose two.)
A. A router prefers a higher origin code to a lower origin code.
B. A router prefers an IBGP path over an EBGP path.
C. A router prefers the local preference over a configured weight.
D. A router prefers a route from a neighbor with the highest IP address over a route from another neighbor with a lower IP address.
E. A router prefers a route with a local preference of 150 over a route with a default local preference.
F. A router prefers a route with a shorter autonomous system path over a route with a lower MED.
Correct Answers: EF
Refer to the exhibit. RTR-38 has two possible paths to reach the indicated networks but only chooses next hop 172.20.72.1. Which two options would cause RTR-38 to choose next hop 172.20.73.1 for network 192.168.101.0 but still use next hop 172.20.72.1 for the remaining networks? (Choose two)
A. On RTR-38 apply a route map to neighbor 172.20.73.1 incoming that changes the local-preference to 200 for network 192.168.101.0.
B. On RTR-38 apply a route map to neighbor 172.20.73.1 incoming that changes the local-preference to 200 for all networks accept 192.168.101.0.
C. On RTR-38 apply the command neighbor 172.20.73.1 weight 200.
D. On RTR-38 apply the command neighbor 172.20.72.1 weight 200.
E. On BGP neighbor router 172.20.73.1 apply a route map that advertises a MED of 200 for network 192.168.101.0 to RTR-38.
F. On BGP neighbor router 172.20.72.1 apply a route map that advertises a MED of 200 for network 192.168.101.0 to RTR-38.
Correct Answers: AF
Refer to the exhibit. On the basis of the information presented, which statement is true?
A. A default route is configured on the local router.
B. Network 126.96.36.199/8 was learned from an OSPF neighbor within the area.
C. OSPF router 188.8.131.52 is an ABR.
D. The default route is learned from an OSPF neighbor.
Correct Answers: B
Refer to the exhibit. Router RT3 discovers network 184.108.40.206 via BGP. Which one of these statements is true?
A. RT1 advertised network 220.127.116.11/24 with a metric of 1000.
B. RT1 advertised network 18.104.22.168/24 with a metric of 782.
C. RT3 is directly connected to RT1 using subnet 192.168.1.0.
D. RT3 has a BGP metric of 782 to reach 192.168.1.1.
E. RT3 has an IGP metric of 782 to reach 192.168.1.1.
F. RT3 has an IGP metric of 1782 to reach 22.214.171.124/24.
Correct Answers: E
Which two statements are true about BGP? (Choose two)
A. The UDP protocol is used for speed and low overhead.
B. The TCP protocol is used for reliability.
C. BGP is a path vector routing protocol.
D. BGP is a distance vector routing protocol.
E. BGP will never send a message unless it is a triggered update.
F. BGP is designed to scale only to large companies.
Correct Answers: BC