Which command is used to determine if a host has logged in to the Fibre Channel fabric?
A. show flogi database
B. show system fc login
C. show npv flogi-table
D. show npv fcns database
E. show interface vfc X flogi
F. show interface flogi
Correct Answer: C
Traffic drop for FCoE is experienced across a Nexus 5548 switch. What is a possible cause?
A. Server’s CNA does not support DCBX and PFC TLV was not negotiated.
B. A “no-drop” class has not been configured for FCoE.
C. The system is running with the default QOS policies.
D. The link is oversubscribed.
Correct Answer: A
On a Nexus 5000 Series Switch, when a VFC is not online, what are the causes? (Choose three.)
A. LLDP transmit and receive are disabled
B. The initiator server has no connectivity to the target storage
C. FIP negotiation timing
D. Peer does not support LLDP
E. VSAN trunk protocol has been enabled
Correct Answer: ABD
When configuring unified ports on a 5548 switch, which port ordering must be respected? (Choose two.)
A. Fibre Channel ports must be configured from the first port in the module.
B. Ethernet ports must be configured from the last port in the module.
C. Fibre Channel ports must be configured from the last port in the module.
D. Ethernet ports must be configured from the first port in the module.
Correct Answer: CD
Which statement describes the FIP function of the FCoE Initiation Protocol?
A. It is required to establish the point-to-point FCoE links with the first switch in the path.
B. It is required to establish the point-to-point FCoE links with any switch across multiple Ethernet segments.
C. It is not used to build the FCoE links.
D. It is used to ensure lossless transport.
Correct Answer: B
Which Ethernet field is used to differentiate between the FCoE frame and the FIP frame?
A. Ethernet FCS
B. Source address
C. Destination address
E. Protocol type
Correct Answer: D
What are the two parallel SCSI specifications? (Choose two.)
A. Up to 25 m bus length
B. Only one device per SCSI bus
C. Up to 16 devices per SCSI bus
D. Half-duplex operation
E. Full-duplex operation
Correct Answer: AC
Which statement describes multihop FCoE function when an FCoE switch receives an FCoE frame from the directly connected FCoE host?
A. The switch receives the FCoE frame and forwards it to another switch over its VE port.
B. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the fabric over its Fibre Channel uplink port.
C. The switch receives the FCoE frame, deapsulates it, and sends the Fibre Channel frame to the Fibre Channel target over its Fibre Channel port.
D. The switch receives the FCoE frame and forwards it to another FCoE device over its VN port.
Correct Answer: A
A Host connected to an NPV switch is not able to see the storage connected to the core switch. Given the output of the show command below, what is the reason of this issue?
switch# show npv status
npiv is enabled
Interface. fc1/1, VSAN: 1, FCID. 0x000000, State. Other
Number of External Interfaces: 4
A. NPV is not enabled on the core switch.
B. The interface connected to the Core switch is in admin down state.
C. The local host interface belongs to the wrong VSAN.
D. The local host interface is not able to login.
Correct Answer: B
Which three are valid methods to monitor and trend SAN port channels with DCNM? (Choose three.)
A. use summary view in the device manager
B. from the DCNM-SAN client, view ISLs in real time from the Performance drop-down list
C. for each port channel, select Monitor Continually
D. configure traps for each port channel to utilize RMON
E. set up flows with the DCNM-SAN client and use the Performance Manager web client for performance collections
Correct Answer: ABE
Download Latest Complete Collection of CCIE Data Center 350-080 Real Exam,pass exam 100%.
Try CCIE Data Center 350-080 Free Demo
Ensurepass Cisco Certifications Exam Questions and Answers
Ensurepass CCIE Data Center Exams Questions and Answers