Latest Cisco CCNP 642-813 SWITCH Real Exam Download 91-100

Ensurepass

QUESTION 91

Refer to the exhibit. Switch S1 has been configured with the command spanning-tree mode rapid-pvst. Switch S3 has been configured with the command spanning-tree mode mst. Switch S2 is running the IEEE 802.1D instance of Spanning Tree. What is the result?

 

clip_image002

 

A.       IEEE 802.1w and IEEE 802.1s are compatible. IEEE 802.1d is incompatible. Switches S1 and S3 can pass traffic between themselves. Neither can pass traffic to switch S2.

B.       Switches S1, S2, and S3 can pass traffic between themselves.

C.       Switches S1, S2, and S3 can pass traffic between themselves. However, if the topology is changed, switch S2 does not receive notification of the change.

D.       IEEE 802.1d, IEEE 802.1w, and IEEE 802.1s are incompatible. All three switches must use the same standard or no traffic can pass between any of the switches.

 

Correct Answer: B

 

 

QUESTION 92

Refer to the exhibit. What can be concluded about VLANs 200 and 202?

 

clip_image004

 

A.        VLAN 202 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 200 carries traffic between community ports and to promiscuous ports.

B.        VLAN 202 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 200 carries traffic from isolated ports to a promiscuous port.

C.        VLAN 200 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 202 carries traffic between community ports and to promiscuous ports.

D.        VLAN 200 carries traffic from promiscuous ports to isolated, community, and other promiscuous ports in the same VLAN. VLAN 202 carries traffic from isolated ports to a promiscuous port.

 

Correct Answer: B

 

 

QUESTION 93

Refer to the exhibit. Both routers are configured for the GLBP. Which statement is true?

 

clip_image006

 

A.       The default gateway addresses of both hosts should be set to the IP addresses of both routers.

B.       The default gateway address of each host should be set to the virtual IP address.

C.       The hosts learn the proper default gateway IP address from router A.

D.       The hosts have different default gateway IP addresses and different MAC addresses for each router.

 

Correct Answer: B

 

 

QUESTION 94

A switch has been configured with PVLANs. With what type of PVLAN port should the default gateway be configured?

 

A.       isolated

B.       promiscuous

C.       community

D.       primary

E.        trunk

 

Correct Answer: B

 

 

QUESTION 95

In the MAC address 0000.0c07.ac03, what does the "03" represent?

 

A.  HSRP router number 3

B.  Type of encapsulation

C.  HSRP group number

D.  VRRP group number

E.  GLBP group number

 

Correct Answer: C

QUESTION 96

A network is deployed using recommended practices of the enterprise campus network model, including users with desktop computers connected via IP phones. Given that all components are QoS-capable, where are the two optimal locations for trust boundaries to be configured by the network administrator? (Choose two.)

 

A.       host

B.       IP phone

C.       access layer switch

D.      distribution layer switch

E.       core layer switch

 

Correct Answer: BC

 

 

QUESTION 97

What is needed to verify that a newly implemented security solution is performing as expected?

 

A.       a detailed physical and logical topology

B.       a cost analysis of the implemented solution

C.       detailed logs from the AAA and SNMP servers

D.      results from audit testing of the implemented solution

 

Correct Answer: D

 

 

QUESTION 98

When configuring port security on a Cisco Catalyst switch port, what is the default action taken by the switch if a violation occurs?

 

A.       protect (drop packets with unknown source addresses)

B.       restrict (increment SecurityViolation counter)

C.       shut down (access or trunk port)

D.       transition (the access port to a trunking port)

 

Correct Answer: C

 

 

QUESTION 99

Refer to the above. HSRP was implemented and configured on two switches while scheduled network maintenance was performed. After the two switches have finished rebooting, you notice via show commands that Switch2 is the HSRP active router. Which two items are the most likely cause of Switch1 not becoming the active router? (Choose two.)

clip_image008

 

A.       Booting has been delayed.

B.       The standby group number does not match the VLAN number.

C.       IP addressing is incorrect.

D.      Preemption is disabled.

E.       Standby timers are incorrect.

F.        IP redirect is disabled.

 

Correct Answer: AD

 

 

QUESTION 100

Private VLANs can be configured as which three port types? (Choose three.)

 

A.       isolated

B.       protected

C.       private

D.       associated

E.        promiscuous

F.        community

 

Correct Answer: AEF

 

 



Download Latest Cisco 642-813 SWITCH Real Free Tests , help you to pass exam 100%.


Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.