[Free] Download New Updated (February 2016) Cisco 352-001 Practice Tests 51-60

Ensurepass

QUESTION 51

In order to meet your service level agreement, your network designer created a design solution that includes interface dampening. In which two ways will interface dampening benefit your overall network design? (Choose two.)

 

A.

Interface dampening uses an exponential backoff algorithm to suppress event reporting to the upper-level protocols.

B.

When the interface is dampened, further link events are not reported to the upper protocol modules.

C.

When the interface is dampened, further link events are reported to the upper protocol module.

D.

Periodic interface flapping that affects the routing system as a whole should have a period shorter than the system convergence time.

 

Correct Answer: AB

 

 

QUESTION 52

Refer to the exhibit. In this BGP design, what is the next hop for 10.1.1.0/24 on R8 and R7?

 

clip_image001

 

A.

The next hop for 10.1.1.0/24 on R7 is R8 and the next hop for R8 is R7.

B.

The next hop for 10.1.1.0/24 on R7 is R5 and the next hop for R8 is R6.

C.

The next hop for 10.1.1.0/24 on R7 is R6 and the next hop for R8 is R5.

D.

The next hop for 10.1.1.0/24 on R7 is R3 and the next hop for R8 is R4.

 

Correct Answer: A

 

 

 

 

 

 

QUESTION 53

You are designing a network to support data, voice and video. Which two main factors will you address to improve network convergence? (Choose two.)

 

A.

event propagation delay

B.

failure detection delay

C.

forwarding engine update delay

D.

routing table recalculation delay

 

Correct Answer: BD

 

 

QUESTION 54

You have created a network design that has two point-to-point Metro Ethernet circuits extending a single production VLAN between two data centers. Under normal circumstances, one circuit will carry traffic and spanning tree will block the other. If the company wants you to make use of both circuits to carry production traffic, which two technologies and features will you investigate to integrate into your network design? (Choose two.)

 

A.

EtherChannel

B.

MST

C.

Multichassis EtherChannel

D.

PVST+

 

Correct Answer: AC

 

 

QUESTION 55

A company wants a design that would support OSPF through a service provider ATM network. Which two OSPF network types should the designer use to establish OSPF neighborship between OSPF routers through the ATM network? (Choose two.)

 

A.

A broadcast network will always work through ATM networks.

B.

A broadcast network will work when the broadcast support is explicitly configured at the ATM network.

C.

Explicit neighbor statements are required when a nonbroadcast network is configured.

D.

Explicit neighbor statements are required when a point-to-multipoint network is configured.

E.

A nonbroadcast network does not require DR selection.

 

Correct Answer: BC

 

 

QUESTION 56

You are the SAN designer for the ABC Company. Due to budget constraints, there is increased pressure by management to further optimize server utilization by implementing virtualization technologies on all servers and increase virtual machines density. Faced with some SAN challenges, the server team requests your help in the design and implementation of the SAN in the new virtualized environment. In which two ways can NPIV be used in your proposed design? (Choose two.)

 

A.

NPIV is used to assign multiple FCIDs to a single N Port.

B.

NPIV is used to define and bind multiple virtual WWNs (VIs) to a single physical pWWN.

C.

You recommend NPIV so that hosts can be members of different zones.

D.

NPIV can be used to allow multiple applications on the same port to use different IDs in the same VSAN.

 

Correct Answer: AD

 

 

QUESTION 57

Refer to the exhibit. If IEEE 802.1w is in use for this network design, what are two locations where spanning- tree root can be placed to ensure the least-disruptive Layer 2 failover for clients within VLANs 3 and 4? (Choose two.)

 

clip_image003

 

A.

Switch A

B.

Switch B

C.

Switch C

D.

Switch D

 

Correct Answer: CD

 

 

 

 

QUESTION 58

You work as a network designer for a company that is replacing their Frame Relay WAN with an MPLS VPN service, where the PE-to-CE routing protocol is BGP. The company has 3000 routes in their distribution routers, and they would like to advertise their access routers through the MPLS network. Their service provider, however, only supports 1000 prefixes per VRF. Which two design solutions can be applied to ensure that your access routers will be able to reach all devices in your network? (Choose two.)

 

A.

Use prefix lists on your distribution routers to control which routes are sent to the MPLS network.

B.

On your distribution routers, configure null routes and aggregate routes for the prefixes in your network.

C.

Configure your distribution routers to send a default route to the MPLS network.

D.

Summarize the routes on the MPLS WAN interfaces of your distribution routers.

 

Correct Answer: BC

 

 

QUESTION 59

Refer to the exhibit. Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why?

 

clip_image005

 

A.

CE1. BGP weight is higher than CE2.

B.

CE2. EBGP administrative distance is lower than RIP.

C.

CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1.

D.

CE1. HSRP on CE1 is in active state.

 

Correct Answer: D

 

QUESTION 60

In which two ways is IPv4 and IPv6 traffic handled in a network design that uses QoS deployment options? (Choose two.)

 

A.

IPv6 and IPv4 traffic is treated in the same way by using a single QoS policy that classifies and matches on both protocols.

B.

IPv6 traffic is treated differently than IPv4 by using the flow-label field, which is built into the IPv6 packet header.

C.

IPv6 traffic does not require QoS because it uses to the flow-label field, which classifies and matches on the IPv6 protocol.

D.

IPv6 traffic is treated differently than IPv4 by using two different QoS policies.

E.

IPv6 traffic is treated differently than IPv4 because it uses only the DSCP value and not the IP precedence.

 

Correct Answer: AD

 

Free VCE & PDF File for Cisco 352-001 Practice Tests

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …