[Free] Download New Updated (February 2016) Cisco 352-001 Practice Tests 121-130

Ensurepass

QUESTION 121

You are designing a solution to eliminate the risk of high CPU utilization on a core network composed of CRS-1 devices. Which option would eliminate the risk of high CPU utilization across the network?

 

A.

Use Local Packet Transport Services (LPTS) to manage hardware SNMP flow rate.

B.

Use the in-band control plane policy feature to reduce the SNMP flow rate.

C.

Use the control plane policy feature and reduce SNMP flow rate.

D.

Use control-plane management-plane in-band and reduce the SNMP flow rate.

E.

Use the control-plane management-plane out-of-band feature to reduce the SNMP flow rate.

 

Correct Answer: < /b>A

 

 

QUESTION 122

As part of the security protocol for your network design, you have designated that option 82 is enabled for DHCP snooping. When option 82 is enabled, which information will be added to the DHCP request?

 

A.

switch MAC address and VLAN, module, and port

B.

remote ID and circuit ID

C.

switch IP address and VLAN, module, and port

D.

switch MAC address and switch IP address

 

Correct Answer: B

 

 

QUESTION 123

In a redesign of a multiple-area network, it is recommended that summarization is to be implemented. For redundancy requirements, summarization is done at multiple locations for each summary. Some customers now complain of higher latency and performance issues for a server hosted in the summarized area. What design issues should be considered when creating the summarization?

 

A.

Summarization adds CPU overhead on the routers sourcing the summarized advertisement.

B.

Summarization prevents the visibility of the metric to the component subnets.

C.

Summarization creates routing loops.

D.

Summarization causes packet loss when RPF is enabled.

 

Correct Answer: B

QUESTION 124

Refer to the exhibit. After this new OSPF design with per-packet load balancing was implemented, Host
A reported that large file downloads from Server A became slow and sometimes failed. The operations team discovered that packets are arriving out of order on R1. Which cost-conscious redesign action will fix the issue?

 

clip_image002

 

A.

Upgrade all links to 10 Gbps.

B.

Add an IP SLA probe on R1 and R4.

C.

Adjust the OSPF auto-cost reference bandwidth on R4.

D.

Adjust the OSPF auto-cost reference bandwidth on all routers.

 

Correct Answer: D

 

 

QUESTION 125

ACME Corporation is deploying a new HR application that requires the network infrastructure to monitor and react to certain conditions in the network. Which feature should be used to meet this design requirement?

 

A.

Cisco IOS Embedded Event Manager

B.

IP SLA

C.

reflexive ACLs

D.

route maps

E.

SOAP

F.

exit status

< p class="MsoNormal" style="cursor: auto; margin: 0cm 0cm 0pt; line-height: normal; text-autospace: ; mso-layout-grid-align: none" align="left"> 

Correct Answer: A

 

 

 

 

 

QUESTION 126

You are designing a traffic monitoring and analysis system for a customer. Which traffic monitoring technique would you recommend to place the least amount of burden on the network infrastructure?

 

A.

SPAN monitor ports

B.

NetFlow

C.

IP NBAR

D.

passive taps

 

Correct Answer: D

 

 

QUESTION 127

Your customer asks you to assist with their traffic policy design. They want to guarantee a minimum amount of bandwidth to certain traffic classes. Which technique would you advise them to implement?

 

A.

Modular QoS CLI

B.

committed accessrRate

C.

policy-based routing

D.

traffic shaping

 

Correct Answer: A

 

 

QUESTION 128

DRAG DROP

clip_image004

 

Correct Answer:

clip_image006

 

 

QUESTION 129

As a service provider you must support a Layer 2 virtualization protocol that does not include the use of label switching. Which option can meet this design requirement?

 

A.

VPLS

B.

VRF
-Lite

C.

QinQ

D.

802.3ad

 

Correct Answer: C

 

 

QUESTION 130

When a multiprotocol environment is designed to have several routers redistribute among the routing domains, how can routing loops be avoided?

 

A.

by using the AS-PATH attribute

B.

by using route tags

C.

by activating split horizon

D.

by implementing spanning tree

 

Correct Answer: B

 

Free VCE & PDF File for Cisco 352-001 Practice Tests

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …