[Free] Download New Latest (June 2016) Cisco 400-201 Practice Test 331-340

Ensurepass

QUESTION 331

Refer to the exhibit. R1 and R2 have a static default route that is configured to point toward the ISP. Both R1 and R2 routers redistribute the default route into OSPF. R2 is the primary gateway toward the ISP and R1 is the backup gateway. All link metrics are the same. Which two steps ensure that traffic to the ISP flows through R2 when the network works properly? (Choose two.)

 

clip_image002

A.

Modify the preference value of the default route on R1 so that it is less preferred than OSPF external routes.

B.

Modify the preference value of the default route on R2 so that it is less preferred than OSPF external routes.

C.

Redistribute the default route as a type 1 external route on R1 and a type 2 external route on R2.

D.

Redistribute the default route as a type 2 external route on R1 and a type 1 external route on R2.

E.

Redistribute the default route on R1 with a higher metric than the existing metric of the distributed default route on R2.

 

Correct Answer: AD

 

 

QUESTION 332

Two customer sites are connected to a service provider backbone through L2VPN. GRE is carrying L2VPN circuits across the backbone. Which part of the packet carries the information to route the L2VPN circuits?

 

A.

GRE header

B.

LDP header

C.

IP header

D.

Layer 2 packet header

 

Correct Answer: A

 

 

QUESTION 333

Refer to the exhibit. MPLS VPN service has been provisioned for customer ABC using an inter-AS MPLS option C.A network admin on ISP1 decided not to redistribute ISP2 received loopback addresses into IGP. Which five commands can be configured to guarantee an end-to-end connectivity between ABC sites? (Choose five.)

 

clip_image004

 

A.

configure on ASBR1 BGP VPNv4 address-family neighbor 7.7.7.7 send-label

B.

configure on ASBR1 BGP VPNv4 address-family neighbor 7.7.7.7 next-hop-self

C.

configure on RR1 BGP VPNv4 address-family neighbor 1.1.1.1 send-label

D.

configure on RR1 BGP IPv4 address-family neighbor 1.1.1.1 send-label

E.

configure on RR1 BGP IPv4 address-family neighbor 3.3.3.3 send-label

F.

configure on RR1 BGP VPNv4 address-family neighbor 3.3.3.3 send-label

G.

configure on ASBR1 BGP IPv4 address-family neighbor 7.7.7.7 send-label

H.

configure on ASBR1 BGP IPv4 address-family neighbor 7.7.7.7 next-hop-self

I.

configure on PE1 BGP VPNv4 address-family neighbor 7.7.7.7 next-hop-self

J.

configure on PE1 BGP IPv4 address-family neighbor 7.7.7.7 next-hop-self

 

Correct Answer: DEGHJ

 

 

QUESTION 334

Router 1 is a PE router within the MPLS core network. The router is designed to provide multicast VPN services for VRF A. A requirement of the core network prevents RP configuration and focuses on SSM for all multicast traffic. Consider this configuration:

 

Router 1

!

vrf definition A

rd 1001:1001

!

address-family ipv4

route-target export 1001:1001

route-target import 1001:1001

mdt default 235.1.1.1

 

Which configuration is needed to support MDT?

 

A.

access-list 110 permit 235.1.1.1 0.0.0.0

ip pim ssm range 110

B.

access-list 110 permit 235.1.1.1 0.0.0.0

ip pim ssm default access-list 110

C.

access-list 10 permit 235.1.1.0 0.0.0.255

ip pim ssm range 10

D.

access-list 10 permit 235.1.1.0 0.0.0.255

ip pim ssm default access-list 10

 

Correct Answer: C

 

 

QUESTION 335

In MVPN GRE, what is the limitation for unicast GRE tunnels?

 

A.

Support more than 500 GRE tunnels per system for multicast.

B.

Transport header support is limited to IPv4.

C.

Transport header support is limited to IPv6.

D.

IPV4 multicast for GRE unicast tunnels is not supported.

 

Correct Answer: B

 

 

QUESTION 336

What is the recommended codepoint as per the RFC 2598 “An Expedited Forwarding PHB” for a packet to receive expedited forwarding PHB?

 

A.

101111

B.

101110

C.

111111

D.

110111

E.

101101

F.

110110

 

Correct Answer: B

 

 

QUESTION 337

What is true regarding Cisco Network Registrar in Cable networks?

 

A.

It provides comprehensive Domain Name system

B.

It provides DHCP administrative functionality

C.

It provides TFTP server functionality.

D.

All of the above are true.

 

Correct Answer: D

 

 

QUESTION 338

Which three counters from a show interface output indicate that data packets were dropped on that interface? (Choose three.)

 

A.

pause input

B.

collisions

C.

lost carrier

D.

frame

E.

runts

F.

input error

 

Correct Answer: BDE

 

 

QUESTION 339

VoIP bearer traffic is typically marked to which DSCP value?

 

A.

af41

B.

af31

C.

0 (default)

D.

cs7

E.

cs3

F.

ef

 

Correct Answer: F

 

 

QUESTION 340

Which series of commands allow a port to transition to an up state in Cisco IOS XR when a non-OEM Cisco TenGigabit Ethernet receiver is installed?

 

A.

RP/0/RSP0/CPU0:ios#conf t

RP/0/RSP0/CPU0:ios(config)#int gigabitEthernet 0/5/0/0

RP/0/RSP0/CPU0:ios(config–if)#transceiver permit pid all

RP/0/RSP0/CPU0:ios(config–if)#commit

B.

RP/0/RSP0/CPU0:ios#conf t

RP/0/RSP0/CPU0:ios(config)#int tenGigE 0/5/0/0

RP/0/RSP0/CPU0:ios(config–if)#transceiver permit pid all

RP/0/RSP0/CPU0:ios(config–if)#commit

C.

RP/0/RSP0/CPU0:ios#conf t

RP/0/RSP0/CPU0:ios(config)#int tenGigE 0/5/0/0

RP/0/RSP0/CPU0:ios(config–if)#shut

RP/0/RSP0/CPU0:ios(config–if)#commit

RP/0/RSP0/CPU0:ios(config–if)#no shut

RP/0/RSP0/CPU0:ios(config–if)#commit

D.

RP/0/RSP0/CPU0:ios#conf t

RP/0/RSP0/CPU0:ios(config)#int gigabitEthernet 0/5/0/0

RP/0/RSP0/CPU0:ios(config–if)#speed 10000

RP/0/RSP0/CPU0:ios(config–if)#commit

 

Correct Answer: B

 

Free VCE & PDF File for Cisco 400-201 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …