Introducing Cisco Data Center Networking
Question No: 91
Which three addresses are valid forms of an IPv6 Address: 2001:0DB8:0000:FE01:0000:0000:0000:0000? (Choose three.)
Question No: 92
Which option is the proper shortened representation of the IPv6 address FDFA:0000:0000:2314:00BA:AF34:0:0121?
A. FDFA::2314:BA:AF34:0:121 B. FDFA::2314::BA:AF34:0:0121 C. FDFA::2314:BA:AF34:121
Question No: 93
Which version of Cisco Nexus Operating System became a common operating system for Cisco Nexus switches and Cisco MDS storage switches?
Answer: D Explanation:
quot;While many of the changes leading to convergence are product releases and features, others are more symbolic. One of these symbolic changes is the rebranding, of Cisco庐 MDS 9000 SAN-OS Software as Cisco MDS 9000 NX-OS庐 Software effective with Release 4.1.quot; http://www.cisco.com/en/US/prod/collateral/ps4159/ps6409/ps5989/ps9898/Rebranding_M DS_9000.html
Question No: 94
Which layer of the OSI model is associated with Token Ring Media Access Control?
Answer: D Explanation:
quot;Token ring local area network (LAN) technology was a protocol which resided at the data link layer (DLL) of the OSI model.quot;
Question No: 95
On which two components of a router can a copy of a running-configuration file be saved manually by an engineer for backup purposes? (Choose two.)
Question No: 96
What are three important factors when configuring VTP on the Cisco Nexus switching platform? (Choose three.)
VLAN 1 must be disabled on the trunk port in order for VTP to work properly.
The VDC administrator or network administrator must enable VTP on the device.
VTP is enabled on all trunk ports by default.
It does not matter which VDC you are working in when you configure VTP on the Cisco Nexus 7000.
For a device operating in VTP client mode, the password and domain name must be properly set.
In VTP server mode, the device will store VLAN information in bootflash.
Per device, VTP configuration is stored in a file named vtp.conf.
VTP pruning can be used on Cisco NX-OS devices.
Question No: 97
There are native VLAN mismatch errors in both switch system logs. An engineer changed the native VLAN to VLAN 50 on switch 2. The commands switchport trunk allowed VLAN add 50 and switchport trunk native VLAN 50 are executed on switch 2. What two events will result from executing these commands? (Choose two.)
Native VLAN mismatch errors cease in the system log.
Native VLAN mismatch errors continue in the system log.
VLAN#39;s 10,20,31, and 50 forward traffic.
VLAN#39;s 10,20, and 31 forward traffic while 50 forwards untagged traffic.
VLAN#39;s 10, 20, and 31 forward traffic, 50 remains down.
Native VLAN mismatch error disables the ports on both switches.
Question No: 98
Which statement is correct regarding a routed port on a multilayer switch?
A routed port requires an SVI definition.
Routed ports cannot be configured on a multilayer switch that uses SVIs.
A maximum of 32 routed ports can be provisioned on a given multilayer switch.
A routed port is a physical port that supports Layer 3 routing.
Question No: 99
Which two features must be licensed on a Cisco Nexus 7000 Switch? (Choose two.)
Virtual Device Contexts
Virtual Port Channel
Question No: 100 HOTSPOT
|Lowest Price Guarantee||Yes||No||No|
|Free VCE Simulator||Yes||No||No|