QUESTION 1
FabricPath brings the benefits of routing protocols to layer 2 network Ethernet environments. What are the advantages of using FabricPath technology? (Choose three.)
A. |
FabricPath provides MAC address scalability with conversational learning |
B. |
Loop mitigation with TTL in the frame field |
C. |
STPl independence |
D. |
10 Gbps bandwidth |
E. |
Layer 2 extensions between data centers |
Correct Answer: ABC
QUESTION 2
A network administrator has installed an N7K-F248-25XP module into an existing chassis. The module is powered on, but the interfaces are all in VDC0. What is the reason for this?
A. |
The chassis needs an EPLD upgrade to support the new module type. |
B. |
The default VDC cannot support F2 modules. |
C. |
The interfaces must be allocated into a VDC for F2 modules only. |
D. |
The module has failed GOLD diagnostics, and the switch has isolated the ports to protect the integrity of the system. |
Correct Answer: C
QUESTION 3
Which two statements about SAN port channels configured on Cisco Nexus 5000 Series switches are true? (Choose two.)
A. |
The bring up protocol automatically detects and overrides any misconfiguration. |
B. |
You can manually configure channel groups, or they can be automatically created. |
C. |
Changes in configuration to the SAN port channel interface must also be made to all members of the channel group. |
D. |
The port channel protocol uses the exchange fabric parameters command to communicate across peer ports in an ISL. |
E. |
The port channel protocol ensures that a set of ports is eligible to be part of the same SAN port channel. |
&nb
sp;
Correct Answer: BE
QUESTION 4
Which three capabilities make the Cisco Nexus 7010 switch an effective solution for the data center core? (Choose three.)
A. |
virtualization |
B. |
unified I/O |
C. |
support for 48-port Gb/s line card |
D. |
support for Data Center Service Modules |
E. |
high performance |
F. |
high availability |
Correct Answer: BEF
QUESTION 5
Which statement about Cisco Unified Fabric switches is correct?
A. |
The Nexus 5000 family of switches does not support vPC when running in either NPV or FCoE NPV mode. |
B. |
The MDS 9100 family of switches is an excellent design choice as a Unified Fabric edge switch. |
C. |
The Nexus 7000 Series Switches can support the NPIV mode of operation, but cannot function as a complete Fibre Channel Forwarder. |
D. |
The Nexus 7000 Series Switches cannot support advanced Cisco Fibre Channel features such as IVR. |
E. |
The MDS family of Cisco Unified Fabric switches supports both the Fibre Channel Forwarder and Fibre Channel Bridge functions. |
Correct Answer: E
QUESTION 6
Which statement about SAN port channels configured on Cisco Nexus 5000 Series Switches is true?
A. |
A single SAN port channel can have both Fibre Channel and virtual Fibre Channel interfaces. |
B. |
SAN port channels can include up to 16 interfaces. |
C. |
SAN port channels distribute traffic across all links in the port channel when source ID and destination ID load balancing are used. |
D. |
The links in SAN port channels can be connected to different sets of switches. |
E. |
The On mode of operation means ports only operate as part of a SAN port channel or remain inactive. |
Correct Answer: E
QUESTION 7
Which capabilities are not supported in DCNM device manager?
A. |
manage SNMPv3 security access to switches |
B. |
save and copy configuration files and software images |
C. |
configure VLANs and Ethernet port channels |
D. |
manage 2148T FEX, 2232PP FEX, and 2248TP FEX |
E. |
configure FCoE |
Correct Answer: C
QUESTION 8
What is the use of NPV in Cisco Unified Computing Systems? (Choose two.)
A. |
Compatibility with third-party Fibre Channel switches |
B. |
Faster throughput |
C. |
Reduce domain IDs in a Fibre Channel environment |
D. |
Support for increased number of VSANs |
E. |
Support for SAN port channels |
Correct Answer: AC
QUESTION 9
If the default VDC is configured to limit resources to a specific module type, what happens when a module that does not match the resource type is installed?
A. |
The module is powered up, and interfaces are in an “admin down” state. |
B. |
The module is denied power, and a syslog message is generated. |
C. |
The module is powered up, and interfaces are allocated to VDC0. |
D. |
The module is powered up, and interfaces are allocated to VDC100. |
Correct Answer: C
QUESTION 10
What is the mechanism that is used to allocate MAC addresses that are assigned to the VDC for the system MAC address?
A. |
NX-OS uses a random MAC address from the IEEE OUI block that is assigned to Cisco. |
B. |
The VDC system MAC is pulled from the active supervisor and concatenated through a hash to ensure uniqueness. |
C. |
NX-OS uses a value that is based on a range that is assigned to the SPROM of the system backplane. |
D. |
The VDC system MAC is based on a range that is allocated to the first line card that is installed in the switch. |
Correct Answer: C
Free VCE & PDF File for Cisco 350-080 Real Exam
Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …
100-105 Dumps VCE PDF
200-105 Dumps VCE PDF
300-101 Dumps VCE PDF
300-115 Dumps VCE PDF
300-135 Dumps VCE PDF
300-320 Dumps VCE PDF
400-101 Dumps VCE PDF
640-911 Dumps VCE PDF
640-916 Dumps VCE PDF
70-410 Dumps VCE PDF
70-411 Dumps VCE PDF
70-412 Dumps VCE PDF
70-413 Dumps VCE PDF
70-414 Dumps VCE PDF
70-417 Dumps VCE PDF
70-461 Dumps VCE PDF
70-462 Dumps VCE PDF
70-463 Dumps VCE PDF
70-464 Dumps VCE PDF
70-465 Dumps VCE PDF
70-480 Dumps VCE PDF
70-483 Dumps VCE PDF
70-486 Dumps VCE PDF
70-487 Dumps VCE PDF
220-901 Dumps VCE PDF
220-902 Dumps VCE PDF
N10-006 Dumps VCE PDF
SY0-401 Dumps VCE PDF