Download New Updated (Spring 2015) Cisco 350-050 Actual Tests 141-150

Ensurepass

 

QUESTION 141

Refer to the exhibit. Two Cisco WLCs on a Cisco WiSM and in the same mobility group are both running 4.2.209.0 code. All the WLANs on both Cisco WLCs are configured for H-REAP local switching. Based on the configurations that are shown, which WLAN or WLANs will still be correctly mapped to a local VLAN if an H-REAP mode AP moves between the two controllers?

 

clip_image002

 

A.

WLANs 2, 3, 4, and 5

B.

All the WLANs

C.

WLAN 1

D.

WLANs 2 and 5

E.

WLANs 1, 2, 4, and 5

F.

WLAN 5

 

Correct Answer: D

 

 

QUESTION 142

You are going to create a new WLAN on your production 5508 WLC running 7.0.116.0 code. You

do not want this WLAN to be in the default AP group on the Cisco WLC until you have thoroughly tested it. How can you achieve this goal when creating the WLAN on the production controller?

 

A.

Create the new WLAN on the Cisco WLC by using WLAN ID 13.

B.

A new WLAN will always be in the default AP group until you move the WLAN to a different AP group

on the Cisco WLC.

C.

Use a Cisco WCS to create the WLAN by using WLAN ID 17.

D.

Create the new WLAN on the Cisco WLC using WLAN ID 20.

 

Correct Answer: D

 

 

QUESTION 143

Refer to the exhibit. You have just configured multicast on the wired network and the controller. You configured the multicast address on the Cisco WLC to be 239.0.1.25, with IGMP snooping disabled. Clients 1 and 3 are associated to AP1, and Client 2 is associated to AP2. All three clients are associated and authenticated to WLAN 1. Using Client 1, you send an IGMP join request to test the multicast application on the wireless network. Which client or clients will need to process the multicast traffic?

clip_image003

 

A.

none of the clients

B.

Client 1

C.

Clients 1 and 2

D.

Clients 1, 2, and 3

E.

Clients 1 and 3

 

Correct Answer: D

 

 

QUESTION 144

Where is Ethernet bridged traffic terminated in a mesh network?

 

A.

WLC

B.

WGB

C.

MAP

D.

RAP

 

Correct Answer: D

 

 

QUESTION 145

Which two statements about the CleanAir and AP modes are true? (Choose two.)

 

A.

The CleanAir chipset on local mode APs can scan all channels simultaneously.

B.

The CleanAir chipset on local mode APs scans only the current channel and only when the AP is silent.

C.

Monitor mode AP interferer reports cannot be merged unless you have a Cisco MSE.

D.

Monitor mode APs have no advantage over local mode APs for CleanAir.

E.

Enhanced local mode (wIPS) allows the CleanAir chipset to scan all channels.

Correct Answer: BC

 

 

QUESTION 146

What is the MAPs behavior if you enable mesh ethernet-bridging vlan-transparent on them?

 

A.

The MAPs bridge traffic that came from the Ethernet port, but only if the vlan tag matches the Cisco WLC

configured VLANs and interfaces.

B.

The MAPs bridge traffic according to the VLAN configuration.

C.

The MAPs bridge toward the backhaul all traffic that arrives on the Ethernet port, without touching the

vlan tag.

D.

The MAPs bridge toward the backhaul only traffic that arrives as untagged on the Ethernet port.

E.

The MAPs untag all traffic that arrives on the Ethernet port and bridge all the traffic toward the backhaul.

 

Correct Answer: E

 

 

QUESTION 147

Which statement about the beamforming (ClientLink) feature on the Cisco WLC is true?

 

A.

It works only with 802.11n APs and clients.

B.

It works only with 802.11n APs and 802.11b/g clients.

C.

It provides a signal gain when the AP transmits towards the client.

D.

It provides a signal gain in both directions (AP to client and client to AP).

 

Correct Answer: C

 

 

QUESTION 148

You are running 7.0.116.0. Connecting wireless clients have an HTTP proxy server configured and need to get web redirected in a web authentication (guest) SSID. Which two statements are true? (Choose two.)

 

A.

You do not need to enable WebAuth proxy redirection on the WLC.

B.

You need to enable WebAuth proxy redirection on the WLC.

C.

You need to configure DHCP option 252 on the WLC to provide clients with proxy configuration for

their browser.

D.

The clients need to manually enter an exception in their browser proxy rule for the WLC virtual IP address.

 

Correct Answer: BD

 

 

QUESTION 149

To improve the overall wireless experience of your users, you do not want any clients to use 802.11b data rates to associate to your wireless network. You do not want 802.11a/g/n data rates to be affected in any way. Which two configuration tasks on the Cisco WLC will achieve this goal? (Choose two.)

 

A.

Disable the 1, 2, 5.5, and 11 Mb/s data rates.

B.

Disable all data rates below 12 Mb/s.

C.

Configure the WLAN radio policies to 802.11a/g only.

D.

Disable the 802.11b network on the Cisco WLC.

E.

Disable the 2.4 GHz radio on all the APs.

F.

Disable the DSSS data rates.

 

Correct Answer: AC

 

 

QUESTION 150

After a scheduled downtime of your 5508 WLC, you notice that only a handful of the 100 APs are rejoining the controller. All the APs are in the same subnet and use default settings. Cisco WLC debugs indicate that the APs are sending discovery and join requests. Only after shutting down all the switch ports that connect to the APs and turning five ports back on at a time can you rejoin all the APs. Why were the APs unable to rejoin the Cisco WLC, and how can you prevent this from happening in the future?

 

A.

Having all the APs in the same VLAN created a Layer 2 broadcast storm, preventing the APs from

receiving discovery and join responses from the Cisco WLC. You can prevent this by configuring the

APs to send syslog messages to a multicast address, using the Cisco WLC CLI only.

B.

Having all the APs in the same VLAN created a Layer 2 broadcast storm, preventing the APs from

receiving discovery and join responses from the Cisco WLC. You can prevent this by configuring the

APs to send syslog messages to a unicast address, using the Cisco WLC CLI only.

C.

Having all the APs in the same VLAN created a Layer 3 broadcast storm, preventing the APs from

receiving discovery and join responses from the Cisco WLC. You can prevent this by configuring the

APs to send syslog messages to a unicast address, using the Cisco WLC CLI only.

D.

Having all the APs in the same VLAN created a Layer 2 broadcast storm. You cannot prevented this

from happening again.

 

Correct Answer: B

 

Free VCE & PDF File for Cisco 350-050 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …