Download New Updated (Spring 2015) Cisco 350-050 Actual Tests 101-110

Ensurepass

 

QUESTION 101

Which authentication method is not supported when using the local RADIUS server feature of an autonomous AP?

 

A.

EAP-FAST

B.

EAP-TLS

C.

LEAP

D.

MAC

 

Correct Answer: B

 

 

QUESTION 102

Refer to the exhibit. Given this debug output from the debug wlccp wds mn command, which event has occurred?

 

clip_image002

 

A.

A wireless client with an IP address of 192.168.200.33 has joined the Cisco WDS domain.

B.

A wireless client with an IP address of 192.168.200.33 has re-associated to the Cisco WDS domain.

C.

A wireless client has been removed from the Cisco WDS domain.

D.

A wireless client has failed authentication.

 

Correct Answer: A

QUESTION 103

Refer to the exhibit. This portion of a Cisco IOS AP configuration refers to a multiple SSID and VLAN configuration.

Which statement is false?

 

clip_image003

 

A.

The mbssid guest-mode command allows guest users to connect to the SSID.

B.

All SSIDs are broadcast by and visible to clients.

C.

The EAP SSID allows client to connect to it by using PEAP as an authentication method.

D.

The AP needs to have subinterfaces 80, 81, and 82 configured, both on the radio 0 and Ethernet interfaces.

 

Correct Answer: A

 

 

QUESTION 102

Wh
en you set up an 802.11n-capable network using autonomous APs, which two settings let you achieve 802.11n rates? (Choose two.)

 

A.

no encryption

B.

WPA2 AES-CCMP encryption

C.

WEP encryption

D.

Cisco Key Integrity Protocol encryption

E.

WPA1 TKIP encryption

F.

WPA2 TKIP encryption

G.

PSK

 

Correct Answer: AB

 

 

QUESTION 105

You want to prevent a wireless client with a MAC address of 00:40:96:a5:b5:d4 from associating with an autonomous AP. Which commands do you use on the autonomous AP?

 

A.

dot11 association mac-list 700

access-list 700 deny 0040.96a5.b5d4 ffff.ffff.ffff

B.

dot11 association mac-list 700

access-list 700 permit 0000.0000.0000 ffff.ffff.ffff

access-list 700 deny 0040.96a5.b5d4 0000.0000.0000

C.

dot11 association mac-list 700

access-list 700 deny 0040.96a5.b5d4 0000.0000.0000

access-list 700 permit
0000.0000.0000 ffff.ffff.ffff

D.

dot11 association mac-list 700

access-list 700 deny 0040.96a5.b5d4 ffff.ffff.ffff

access-list 700 permit 0000.0000.0000 ffff.ffff.ffff

E.

none of the above

 

Correct Answer: C

 

 

QUESTION 106

Which set of steps shows the correct order for adding an SSID with WPA security on a new VLAN via the GUI on an autonomous AP?

 

A.

Create the SSID, create the VLAN, and then set up encryption.

B.

Create the VLAN, set up encryption, and then create the SSID.

C.

Set up encryption, create the VLAN, and then create the SSID.

D.

Create the VLAN, create the SSID, and then set up encryption.

 

Correct Answer: B

 

 

QUESTION 107

What is the function of the distance command on an autonomous 802.11 bridge?

 

A.

to adjust the data rate of the packet transmission

B.

to adjust the bridge timeout values to account for the time that is required for radio signals to travel

from bridge to bridge

C.

to give the person reading the configuration an idea of how far apart the bridge links are

D.

to increase the time that is needed for authentication

 

Correct Answer: B

 

 

QUESTION 108

Which command can you use to configure the standalone AP to use the NTP server at IP address 192.168.1.99?

 

A.

ntp server 192.168.1.99

B.

sntp server 192.168.1.99

C.

ntp broadcast client 192.168.1.99

D.

sntp broadcast client 192.168.1.99

 

Correct Answer: B

 

 

QUESTION 109

When configuring multiple BSSIDs in autonomous APs, which three requirements and guidelines should you follow? (Choose three.)

 

A.

APs must contain an 802.11a or 802.11b/g radio that supports multiple BSSIDs.

B.

RADIUS-assigned VLANs are supported when you enable multiple BSSIDs.

C.

VLANs cannot be configured.

D.

When you enable BSSIDs, the AP automatically maps a BSSID to each SSID.

You cannot manually map a BSSID to a specific SSID.

E.

Any Wi-Fi certified client device can associate to an AP that uses multiple BSSIDs.

F.

You cannot enable multiple BSSIDs on APs that participate in WDS.

 

Correct Answer: ADE

 

 

QUESTION 110

Which debug command is best to use when you suspect that a client will not connect to an autonomous AP because of an incorrect WPA PSK?

 

< td style="border-top-style: none; background: white; border-bottom-style: none; padding-bottom: 0cm; padding-top: 0cm; border-right-style: none; padding-left: 0cm; border-left-style: none; padding-right: 0cm" valign="top" width="1161">

debug dot11 station connection failure

A.

debug dot11 mgmt station

B.

debug dot11 aaa authenticator process

C.

D.

debug dot11 encryption

 

Correct Answer: C

 

Free VCE & PDF File for Cisco 350-050 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …