Download New Updated (Spring 2015) Cisco 350-001 Actual Tests 341-350

Ensurepass

 

QUESTION 341

What are the mandatory, well-known BGP attributes?

 

A.       origin, AS-path, next-hop

B.       AS-path, origin, MED

C.       AS-path, origin, weight

D.      AS-path, weight, MED

 

Correct Answer: A

 

 

QUESTION 342

Network A has a spanning-tree problem in which the traffic is selecting a longer path. How is the path cost calculated?

 

A.       number of hops

B.       priority of the bridge

C.       interface bandwidth

D.      interface delay

E.       None of the above

 

Correct Answer: C

 

 

QUESTION 343

You deployed new fibers in your network to replace copper spans that were too long. While reconnecting the network, you experienced network problems because you reconnected wrong fibers to wrong ports. What could you do to prevent this type of problem in the future, particularly when connecting and reconnecting fiber pairs?

 

A.       Only use fiber in pairs.

B.       Configure root guard on your switches.

C.       Do not use fiber but use copper.

D.      Configure UDLD to prevent one-way link conditions.

 

Correct Answer: D

 

 

QUESTION 344

While deploying a new switch, you accidentally connect ports 3/12 and 3/18 together, creating a loop. STP detected it and placed port 3/18 in blocking mode. Why did STP not place port 3/12 in blocking mode instead?

 

A.       Port 3/12 was already up and forwarding before the loop was created.

B.       Port priority is based on lowest priority and lowest port number.

C.       You connected the wire on port 3/18 last.

D.      None of the above, it is purely random.

 

Correct Answer: B

 

 

QUESTION 345

What keywords do you need to the access-list to provide to the logging message like source address and source mac address?

 

A.       Log

B.       Log-input

C.       Log-output

D.      Logging

 

Correct Answer: B

 

 

QUESTION 346

The OSPF RFC 3623 Graceful Restart feature allows you to configure IETF NSF in multivendor networks. When using OSPF Graceful Restart, which mechanism is used to continue forwarding packets during a switchover?

 

A.       Reverse Path Forwarding

B.       Hardware-based forwarding

C.       UDP forwarding

D.      Layer 2 Forwarding

 

Correct Answer: B

 

 

QUESTION 347

Multi-Protocol Label Switching (MPLS) is a data-carrying mechanism that belongs to the family of packet-switched networks. For an MPLS label, if the stack bit is set to1, which option is true?

 

A.       The stack bit will only be used when LDP is the label distribution protocol

B.       The label is the last entry in the label stack.

C.       The stack bit is for Cisco implementations exclusively and will only be used when TDP is the label distribution protocol.

D.      The stack bit is reserved for future use.

 

Correct Answer: B

 

 

QUESTION 348

You work as a network engineer for the company, you want to configure two BGP speakers to form an EBGP session across a firewall. On the engineer’s network, the firewall always permits TCP sessions that are initiated from the inside network (the network attached to the inside interface of the firewall). What prerequisite is there for enabling BGP to run on this network?

 

A.       EBGP multihop will need to be configured for this to work.

B.       This should work with normal BGP peering, with no additional configuration on the BGP speakers or the firewall.

C.       The BGP protocol port must be opened on the firewall.

D.      There is no way to make BGP work across a firewall.

 

Correct Answer: A

 

 

 

 

 

QUESTION 349

For the following LMI types, which three can be configured for use with Frame Relay on a Cisco router? (Choose three.)

 

A.       Cisco

B.       ANSI – Annex D

C.       Q.931 – Annex B

D.      Q.933 – Annex A

 

Correct Answer: ABD

 

 

QUESTION 350

A user has no network connectivity. A check of the associated port indicates that the interface is up, the line protocol is down. Which item would most likely cause this problem?

 

A.       Speed mismatch

B.       Incorrect encapsulation

C.       MTU set too low

D.      Duplex mismatch

 

Correct Answer: A

 

Free VCE & PDF File for Cisco 350-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …