Download New Updated (Spring 2015) Cisco 350-001 Actual Tests 121-130

Ensurepass

 

QUESTION 121

Which three factors have the biggest influence on OSPF scalability? (Choose three.)

 

A.       Flooding paths and redundancy

B.       Amount of routing information in the OSPF area or routing domain

C.       Number of routers with Cisco Express Forwarding enabled

D.      Number of neighbor adjacencies

E.       Other routing protocols in use

F.        OSPF timer reconstruction negotiation

G.      Redistribution with BGP neighbors

H.      Redistribution with other IGP routing protocols, such as RIP or EIGRP

 

Correct Answer: ABD

 

 

QUESTION 122

Refer to the exhibit. Which statement is correct?

 

clip_image001

 

A.       Ethernet0/1 is in the outgoing interface list, and Ethernet1/0 is in the incoming interface list.

B.       Ethernet1/0 is in the outgoing interface list, and Ethernet0/1 is in the incoming interface list.

C.       This is not a valid MFIB entry.

D.      This MFIB entry is currently not used to forward multicast traffic.

E.       All multicast packets for this MFIB entry are punted.

 

Correct Answer: B

 

 

QUESTION 123

Refer to the exhibit. Which statement is correct?

 

clip_image002

 

A.       Group 232.1.1.1 will be in SSM mode, but without the access-list ssm-groups it would also be in SSM mode.

B.       Group 232.1.1.1 will not be in SSM mode yet; some further configuration is needed.

C.       Group 232.1.1.1 can never be in SSM mode, regardless of any configuration.

D.       Group 232.1.1.1 will be in SSM mode because of the access-list ssm-groups.

E.        Group 232.1.1.1 is not in SSM mode yet; a different access-list would be needed to achieve this.

 

Correct Answer: D

 

 

QUESTION 124

What is the RP for IPv6 multicast address FF76:0130:2001:db8:3811::2323?

 

A.       2001:db8:3811::1

B.       2001:db8:3811::2323

C.       2001:db8:3811::0130

D.      2001:db8:3811::3

E.       2001:db8:3811::6

 

Correct Answer: A

 

 

QUESTION 125

What is the default behaviour of PIM-SSM If there are multiple equal-cost paths to the multicast source?

 

A.       It will send the join only to the neighbor with the highest IP address.

B.       It will send the join only to the neighbor with the lowest IP address.

C.       It will send the join in a round-robin fashion across all neighbors.

D.      It will send the join to all neighbors.

 

Correct Answer: A

 

 

QUESTION 126

What does the command ip pim send-rp-discovery scope 16 achieve?

 

A.       it enables PIM BSR

B.       it makes the router an Auto-RP mapping agent

C.       it advertises the router as an RP with Auto-RP

D.      it makes the router an Auto-RP client

 

Correct Answer: B

 

 

QUESTION 127

Which command can be used to check the assignment of RPs to multicast groups?

 

A.       show ip pim rendez-vous

B.       show ip rpf rp mapping

C.       show ip pim rp mapping

D.      show ip pim rp info

E.       show ip pim

 

Correct Answer: C

 

 

QUESTION 128

Refer to the exhibit. Which two statements are correct? (Choose two.)

 

clip_image004

 

A.  The packet is received on the private interface.

B.  Zone-Based Firewall is configured on the router.

C.  Logging is enabled for the access list.

D.  Private is an identification of that ACE.

E.  The Telnet c
onnection is successfully set up.

 

Correct Answer: CD

 

 

 

 

 

 

 

 

QUESTION 129

Refer to the exhibit. Which option is correct?

 

clip_image005

 

A.       This configuration is not valid.

B.       The user can use Telnet to any interface on the device as long as the input interface for Telnet is FastEthernet 0/0.

C.       Telnet access is not allowed on the router.

D.      The user can use Telnet from the router only if the Telnet is sourced from FastEthernet 0/0.

 

Correct Answer: B

 

 

QUESTION 130

What is a requirement to enable Cisco IOS IPS with 5.x signature?

 

A.       disable Zone-Based Firewall as the two features are not compatible

B.       disable Cisco Express Forwarding as the two features are not compatible

C.       generate a certificate and export on Cisco.com to receive a signature update

D.      import the public RSA key from the Cisco IPS team that allows the router to verify that a signature update (which was signed by this key) comes from Cisco

 

Correct Answer: D

 

Free VCE & PDF File for Cisco 350-001 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …