Download New Updated (Spring 2015) Cisco 200-101 Actual Tests 41-50




The internetwork infrastructure of company XYZ consists of a single OSPF area as shown in the graphic. There is concern that a lack of router resources is impeding internetwork performance. As part of examining the router resources, the OSPF DRs need to be known. All the router OSPF priorities are at the default and the router IDs are shown with each router. Which routers are likely to have been elected as DR? (Choose two.)




A.      Corp-1

B.      Corp-2

C.      Corp-3

D.      Corp-4

E.       Branch-1

F.       Branch-2


Correct Answer: DF




What does a router do if it has no EIGRP feasible successor route to a destination network and the successor route to that destination network is in active status?


A.      It routes all traffic that is addressed to the destination network to the interface indicated in the routing table.

B.      It sends a copy of its neighbor table to all adjacent routers.

C.      It sends a multicast query packet to all adjacent neighbors requesting available routing paths to the destination network.

D.      It broadcasts Hello packets to all routers in the network to re-establish neighbor adjacencies.


Correct Answer: C




Refer to the exhibit. The network is converged. After link-state advertisements are received from Router_A, what information will Router_E contain in its routing table for the subnets and



A.        O [110/13] via, 00:00:07, FastEthernet 0/0

O [110/13] via, 00:00:16, FastEthernet 0/0


B.        O [110/1] via, 00:00:07, Serial 1/0

O [110/3] via, 00:00:16, FastEthernet 0/0


C.        O [110/13] via, 00:00:07, Serial 1/0

O [110/13] via, 00:00:16, Serial 1/0

O [110/13] via, 00:00:16, FastEthernet 0/0


D.        O [110/3] via, 00:00:07, Serial 1/0

O [110/3] via, 00:00:16, Serial 1/0


Correct Answer: A




Which command is used to display the collection of OSPF link states?


A.      show ip ospf link-state

B.      show ip ospf lsa database

C.      show ip ospf neighbors

D.      show ip ospf database


Correct Answer: D




What is the default administrative distance of OSPF?


A.      90

B.      100

C.      110

D.      120


Correct Answer: C




Refer to the exhibit. When running EIGRP, what is required for RouterA to exchange routing updates with RouterC?




A.      AS numbers must be changed to match on all the routers.

B.      Loopback interfaces must be configured so a DR is elected.

C.      The no auto-summary command is needed on Router A and Router C.

D.      Router B needs to have two network statements, one for each connected network.


Correct Answer: A




Refer to the exhibit. How will the router handle a packet destined for




A.      The router will drop the packet.

B.      The router will return the packet to its source.

C.      The router will forward the packet via Serial2.

D.      The router will forward the packet via either Serial0 or Serial1.


Correct Answer: C




Refer to the exhibit. The Lakeside Company has the internetwork in the exhibit. The administrator would like to reduce the size of the routing table on the Central router. Which partial routing table entry in the Central router represents a route summary that represents the LANs in Phoenix but no additional subnets?




A. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


B. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


C. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


D. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


E. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


F. is subnetted, 1 subnets

D [90/20514560] via, 6w0d, Serial0/1


Correct Answer: D




What information does a router running a link-state protocol use to build and maintain its topological database? (Choose two.)


A.      hello packets

B.      SAP messages sent by other routers

C.      LSAs from other routers

D.      beacons received on point-to-point links

E.       routing tables received from other link-state routers

F.       TTL packets from designated routers


Correct Answer: AC




Which commands are required to properly configure a router to run OSPF and to add network to OSPF area 0? (Choose two.)


A.      Router(config)# router ospf 0

B.      Router(config)# router ospf 1

C.      Router(config)# router ospf area 0

D.      Router(config-router)# network 0

E.       Router(config-router)# network area 0

F.       Router(config-router)# network area 0


Correct Answer: BE


Free VCE & PDF File for Cisco 200-101 Real Exam

Instant Access to Free VCE Files: CCNA | CCNP | CCIE …
Instant Access to Free PDF Files: CCNA | CCNP | CCIE …