CCVP/CCIP QoS(642-642) Lab – DSCP & CoS

You are required to configure the fa0/1, fa0/10 and fa0/11 ports on the Cisco Catalyst 2950 switch according to the following:
On port fa0/1, trust all incoming settings.
On port fa0/11, trust all incoming settings.
On port fa0/10, trust the incoming CoS setting only if a Cisco IP Phone is connected to the fa0/10 port: otherwise do not trust any CoS or DSCP markings coming in.



The Answer:

2950-SWITCH#config terminal
2950-SWITCH(config)#cdp enable
2950-SWITCH(config)#interface fastethernet0/1
2950-SWITCH(config-if)#mls qos trust dscp
2950-SWITCH(config-if)#no sh
2950-SWITCH(config-if)#interface fastethernet0/11
2950-SWITCH(config-if)#mls qos trust cos
2950-SWITCH(config-if)#no sh
2950-SWITCH(config-if)#interface fastethernet0/10
2950-SWITCH(config-if)#mls qos trust device cisco-phone
2950-SWITCH(config-if)#no sh
2950-SWITCH#show mls qos interface fastethernet0/1
2950-SWITCH#show mls qos interface fastethernet0/11
2950-SWITCH#show mls qos interface fastethernet0/10
2950-SWITCH#copy running-config startup-config

If you want to learn more, you can visit:

Ensurepass offers Latest 2013 642-642 Real Exam Questions , help you to pass exam 100%.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.