CCNP ISCW(642-825) Lab – PPPoE


Pass4sure is a small export company .This firm has an existing enterprise network that is made up exclusively of routers that are using EIGRP as the IGP. Its network is up and operating normally. As part of its network expansion, Pass4sure has decided to connect to the internet by a broadband cable ISP. Your task is to enable this connection by use of the information below.

Connection Encapsulation: PPP

Connection Type: PPPoE client

Connection Authentication: None

Connection MTU: 1492 bytes

Address: Dynamically assigned by the ISP

Outbound Interface: E0/0

You will know that the connection has been successfully enabled when you can ping the simulated Internet address of

Note: Routing to the ISP: Manually configured default route




P4S-R(config)#int e0/0
P4S-R(config-if)#pppoe enable
P4S-R(config-if)#pppoe-client dial-pool-number 1
P4S-R(config-if)#no sh
P4S-R(config)#int dialer1
P4S-R(config-if)#encapsulation ppp
P4S-R(config-if)#ip address negotiated
P4S-R(config-if)#dialer pool 1
P4S-R(config-if)#ip mtu 1492
P4S-R(config-if)#no shut
P4S-R(config)#ip route dialer1
<—- ip routing is default static to internet provider
P4S-R#copy run start

The test ip address given in the scenario:

P4S-R# ping
!!!!! <—– if ping successful, you have completed this lab!

That is all, hope to helpful for you. Best Luck for ur ISCW Exam.

If you need the complete pass4sure test questions for 642-825 Exam, you can visit Latest Pass4sure 642-825,maye it helpful for ur exam!

[Report Dead Link] Please leave a comment or send email to report dead links, so that we will update new links within 24 hours.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.