CCNA ICND2 Lab 7 – Configure Static Route and Default Route

Ensurepass

Lab Topology:

Lab Requirements:

1. The router names are P4S1, P4S2 and P4S3.

2. Configure default routes on P4S1 and P4S3.

3. Configure a static route on P4S2.

Lab Process:

1. Configure P4S1

Router>enable

Router#configure terminal

Router(config)#hostname P4S1

P4S1(config)#interface s1/1

P4S1(config-if)#ip add 192.168.12.1 255.255.255.0

P4S1(config-if)#no shut

P4S1(config-if)#interface loopback 0

P4S1(config-if)#ip add 1.1.1.1 255.255.255.0

2. Configure P4S2

Router>enable

Router#configure terminal

Router(config)#host P4S2

P4S2(config)#interface s1/1

P4S2(config-if)#ip add 192.168.12.2 255.255.255.0

P4S2(config-if)#no shut

P4S2(config)#interface s1/2

P4S2(config-if)#ip add 192.168.23.2 255.255.255.0

P4S2(config-if)#no shut

3. Configure P4S3

Router>enable

Router#configure terminal

Router(config)#host P4S3

P4S3(config)#int s1/1

P4S3(config-if)#ip add 192.168.23.3 255.255.255.0

P4S3(config-if)#no shut

P4S3(config)#interface loopback 0

P4S3(config-if)#ip add 3.3.3.3 255.255.255.0

Configure default routes on P4S1 and P4S3 and a static route on P4S2.

P4S1

P4S1(config)#ip route 0.0.0.0 0.0.0.0 192.168.12.2

P4S3

P4S3(config)#ip route 0.0.0.0 0.0.0.0 192.168.23.2

P4S2

P4S2(config)#ip route 1.1.1.0 255.255.255.0 192.168.12.1

P4S2(config)#ip route 3.3.3.0 255.255.255.0 192.168.23.3

Authentication:

Use the extended ping command on the P4S1 or P4S3 to test connectivity.





[Report Dead Link] Please leave a comment or send email to report dead links, so that we will update new links within 24 hours.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.