CCNA ICND1 Lab8 – Configuration of RIPv2

Ensurepass

Lab Tips:

Cisco implementation of RIPv2 supports two modes of authentication: plain text authentication and Message Digest 5 (MD5) authentication. Plain text authentication mode is the default setting in every RIPv2 packet, when authentication is enabled. Plain text authentication should not be used when security is an issue, because the unencrypted authentication password is sent in every RIPv2 packet.

Lab Topology:

 

Lab Requirements:

Conifgure the routers with RIP version 2(RIP-2)so that all devices can ping any other device.

Lab Process:

Basic route configuration omitted

P4S-R1

Router>en

Router#conf t

Router(config)#hostname P4S-R1

P4S-R1 (config)#int S0

P4S-R1(config-if)#ip add 192.168.1.1 255.255.255.0

P4S-R1 (config-if)#clock rate 64000

P4S-R1 (config-if)#no shut

P4S-R1(config-if)#exit

P4S-R1(config)router rip

P4S-R1(config-router)version 2

P4S-R1(config-router)network 192.168.1.0

P4S-R1(config-router)end

P4S-R2

Router>en

Router#conf t

Router(config)#hostname P4S-R2

P4S-R2(config)#int S0

P4S-R2(config-if)#ip add 192.168.1.2 255.255.255.0

P4S-R2(config-if)#no shut

P4S-R2(config-if)#exit

P4S-R2(config)router rip

P4S-R2(config-router)version 2

P4S-R2(config-router)network 192.168.1.0

P4S-R2(config-router)end





[Report Dead Link] Please leave a comment or send email to report dead links, so that we will update new links within 24 hours.

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.