2013 Latest 640-802 Pass4sure Free Tests 291-300

Ensurepass     1.       QUESTION Refer to the diagram:     Which three statements describe the router port configuration and the switch port configuration as shown in the topology? (Choose three.)   A.  The Router1 WAN port is configured as a trunking port. B.  The Router1 port connected to Switch1 is configured using subinterfaces. C.  The Router1 port connected to Switch1 is configured as 10 Mbps. D.  The Switch1 port connected to Router1 is configured as a trunking Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 281-290

Ensurepass     1.       QUESTION Which two link protocols are used to carry multiple VLANs over a single link? (Choose two.)   A.  VTP B.  802.1q C.  IGP D.  ISL E.  802.3u   Answer: BD           2.       QUESTION Which VTP mode is capable of creating only local VLANs and does not synchronize with other switches in the VTP domain?   A.  client B.  dynamic C.  server D.  static E.  transparent   Answer: E     3.       QUESTION Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 271-280

Ensurepass 1.       QUESTION Refer to the exhibit:   Which two statements are true about interVLAN routing in the topology that is shown in the exhibit? (Choose two.)   A.  Host E and host F use the same IP gateway address. B.  Router1 and Switch2 should be connected via a crossover cable. C.  Router1 will not play a role in communications between host A and host D. D.  The FastEthernet 0/0 interface on Router1 must be configured with subinterfaces. E.  Router1 needs more Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 261-270

Ensurepass     1.       QUESTION What is one benefit of PVST+?   A.  PVST+ reduces the CPU cycles for all the switches in the network. B.  PVST+ automatically selects the root bridge location, to provide optimization. C.  PVST+ allows the root switch location to be optimized per vlan. D.  PVST+ supports Layer 3 load balancing without loops.   Answer: C     2.       QUESTION At which layer of the OSI model is RSTP used to prevent loops?   A.     data Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 251-260

Ensurepass   1.       QUESTION What is valid reason for a switch to deny port access to new devices when port security is enabled?   A.  The denied MAC addresses have already been learned or confgured on another secure interface in the same VLAN. B.  The denied MAC address are statically configured on the port. C.  The minimum MAC threshold has been reached. D.  The absolute aging times for the denied MAC addresses have expired.   Answer: B     2.       QUESTION Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 241-250

Ensurepass  1.       QUESTION Refer to the topology shown in the exhibit: Which ports will be STP designated ports if all the links are operating at the same bandwidth? (Choose three.)   A.     Switch A - Fa0/0 B.     Switch A - Fa0/1 C.     Switch B - Fa0/0 D.     Switch B - Fa0/1 E.      Switch C - Fa0/0 F.      Switch C - Fa0/1   Answer: BCD     2.       QUESTION A Catalyst 2950 needs to be reconfigured. What steps will ensure that Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 231-240

Ensurepass  1.       QUESTION Which two of these are used by bridges and switches to prevent loops in a layer 2 network? (Choose two.)   A.  802.1D B.  VTP C.  802.1Q D.  STP E.  SAP   Answer: AD     2.       QUESTION Which switch would STP choose to become the root bridge in the selection process?   A.     32768: 11-22-33-44-55-66 B.     32768: 22-33-44-55-66-77 C.     32769: 11-22-33-44-55-65 D.     32769: 22-33-44-55-66-78   Answer: Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 221-230

Ensurepass   1.       QUESTION Part of the OSPF network is shown below: You work as a network technician, study the exhibits carefully. Assume that all router interfaces are operational and correctly configured. In addition, assume that OSPF has been correctly configured on router R2. How will the default route configured on R1 affect the operation of R2?   Configuration exhibit:   A.     Any packet destined for a network that is not directly connected to router R2 will be Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 211-220

Ensurepass  1.       QUESTION Refer to the exhibit: Given the output for this command, if the router ID has not been manually set, what router ID will OSPF use for this RouterD?   A.     10.1.1.2 B.     10.154.154.1 C.     172.16.5.1 D.     192.168.5.3   Answer: C     2.       QUESTION Which commands are required to properly configure a router to run OSPF and to add network 192.168.16.0/24 to OSPF area 0? (choose two)   A.     Router(config)#router Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 201-210

Ensurepass  1.       QUESTION What are three characteristics of the OSPF routing protocol? (Choose three.)   A.  It converges quickly. B.  OSPF is a classful routing protocol. C.  It uses cost to determine the best route. D.  It uses the DUAL algorithm to determine the best route. E.  OSPF routers send the complete routing table to all directly attached routers. F.  OSPF routers discover neighbors before exchanging routing information.   Answer: ACF     2.       Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 191-200

Ensurepass    1.       QUESTION Refer to the exhibit: Which two statements are true about the loopback address that is configured on RouterB? (Choose two.) A.  It ensures that data will be forwarded by RouterB. B.  It provides stability for the OSPF process on RouterB. C.  It specifies that the router ID for RouterB should be 10.0.0.1. D.  It decreases the metric for routes that are advertised from RouterB. E.  It indicates that RouterB should be elected the DR for the Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 181-190

Ensurepass     1.       QUESTION Which two statements are characteristics of a distance vector routing protocol? (Choose two)   A.     RIP is an example of distance vector routing protocols. B.     Updates are periodic and include the entire routing table. C.     Routing updates are sent only after topology changes D.     The protocol can be useful in hub-and-spoke and hierarchical networks. E.      Convergence is usually faster than with link state protocols F.      Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 171-180

Ensurepass     1.       QUESTION A medium-sized company has a Class C IP address. It has two Cisco routers and one non-Cisco router. All three routers are using RIP version 1. The company network is using the block of 198.133.219.0/24. The company has decided it would be a good idea to split the network into three smaller subnets and create the option of conserving addresses with VLSM. What is the best course of action if the company wants to have 40 hosts in each of the three subnets?   A.     Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 161-170

Ensurepass    1.       QUESTION Refer to the exhibit: What information can be gathered from the output?   A.  One router is running RIPv1. B.  RIP neighbor is 224.0.0.9. C.  The network contains a loop. D.  Network 10.10.1.0 is reachable.   Answer: D     2.       QUESTION Use the output from the router shown in the graphic above to determine which of the following are correct. (Choose two.) A.     Router John uses a link-state routing protocol. B.     Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 151-160

Ensurepass  1.       QUESTION Refer to the exhibit: Which three statements are true about how router JAX will choose a path to the 10.1.3.0/24 network when different routing protocols are configured? (Choose three.)   A.  By default, if RIPv2 is the routing protocol, only the path JAX-ORL will be installed into the routing table. B.  The equal cost paths JAX-CHI-ORL and JAX- NY-ORL will be installed in the routing table if RIPv2 is the routing protocol. C.  When EIGRP is the Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 141-150

Ensurepass  1.       QUESTION The network technician is planning to use the 255.255.255.224 subnet mask on the network. Which three valid IP addresses can the technician use for the hosts? (Choose Three)   A.     172.22.243.127 B.     172.22.243.191 C.     172.22.243.190 D.     10.16.33.98 E.      10.17.64.34 F.      192.168.1.160   Answer: CDE     2.       QUESTION In the implementation of VLSM techniques on a network using a single Class Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 131-140

Ensurepass  1.       QUESTION Which three IP addresses can be assigned to hosts if the subnet mask is /27 and subnet zero is usable? (Choose three.)   A.     10.15.32.17 B.     17.15.66.128 C.     66.55.128.1 D.     135.1.64.34 E.      129.33.192.192 F.      192.168.5.63   Answer: ACD     2.       QUESTION Which of the following IP addresses can be assigned to the host devices? (Choose two.)   A.     205.7.8.32/27 B.     191.168.10.2/23 C.     Read more [...]

2013 Latest 640-802 Pass4sure Free Tests 121-130

Ensurepass  1.       QUESTION Refer to the exhibit: The user at Workstation B reports that Server A cannot be reached. What is preventing Workstation B from reaching Server A?   A.  The IP address for Server A is a broadcast address. B.  The IP address for Workstation B is a subnet address. C.  The gateway for Workstation B is not on the same subnet. D.  The gateway for Server A is not on the same subnet.   Answer: D     2.       QUESTION Which of the following Read more [...]