[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 591-600

EnsurepassQUESTION 591 Refer to the exhibit. You are bringing a new MPLS router online and have configured only what is shown to bring LDP up. Assume that the peer has been configured in a similar manner. You verify the LDP peer state and see that there are no neighbors. What will the output of show mpls ldp discovery show?     A. Interfaces: Ethernet0/0 (ldp): xmit B. Interfaces: Ethernet0/0 (ldp): xmit/recv LDP Id: 25.25.25.2:0; IP addr: 192.168.12.2 C. Interfaces: Ethernet0/0 Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 581-590

EnsurepassQUESTION 581 Refer to the exhibit. If OSPF is implemented on the network, which additional configuration is needed to allow traffic from host 10.4.1.15/24 to host 10.1.2.20/24?     A. A virtual link between router 2 and router 4 B. A virtual link between router 3 and router 4 C. A virtual link between router 2 and router 3 D. The current design allows traffic between the two hosts.   Correct Answer: D Explanation: This specific traffic from 10.4.1.0/24 to 10.1.2.0/24 Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 571-580

EnsurepassQUESTION 571 What is the maximum number of secondary IP addresses that can be configured on a router interface?   A. 1 B. 2 C. 4 D. 1024 E. 65535 F. no limit to the number of addresses   Correct Answer: F Explanation: From "IP Routing Frequently Asked Questions"   Q. What are the maximum number of secondary IP addesses that can be configured on a router interface? A. There are no limits on configuring secondary IP addresses on a router interface.   Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 561-570

EnsurepassQUESTION 561 A configuration includes the line ip nbar port-map SSH tcp 22 23 443 8080. Which option describes the effect of this configuration line?   A. It configures NBAR to search for SSH using ports 22, 23, 443, and 8080. B. It configures NBAR to allow SSH connections only on ports 22, 23, 443, and 8080. C. It enables NBAR to inspect for SSH connections. D. It creates a custom NBAR port-map named SSH and associates TCP ports 22, 23, 443, and 8080 to itself.   Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 551-560

EnsurepassQUESTION 551 Which two options are valid for the number of bytes in a BGP AS number? (Choose two.)   A. 2 bytes B. 4 bytes C. 6 bytes D. 8 bytes E. 16 bytes   Correct Answer: AB Explanation: During the early time of BGP development and standardization, it was assumed that availability of a 16 bit binary number to identify the Autonomous System (AS) within BGP would have been more than sufficient. The 16 bit AS number, also known as the 2-byte AS number, provides Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 531-540

EnsurepassQUESTION 531 MPLS LDP IGP synchronization is configured on a link. The OSPF adjacency on that link is UP but MPLS LDP synchronization is not achieved. Which statement about this scenario is true?   A. The router excludes the link from its OSPF LSA type 1. B. The router flushes its own router LSA. C. The router advertises the link in its router LSA with max-metric. D. The router advertises an LSA type 2 for this link, with the metric set to max-metric. E. The router Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 541-550

EnsurepassQUESTION 541 DRAG DROP Drag and drop the path-selection criteria on the left into the correct route-selection order on the right, that a router will use when having multiple routes toward the same destination.     Correct Answer:     QUESTION 542 DRAG DROP Drag and drop the argument of the mpls ip cef load-sharing command on the left to the function it performs on the right.     Correct Answer:     QUESTION 543 Refer to the exhibit. Which configuration Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 521-530

EnsurepassQUESTION 521 Which option describes the effect of the OSPF default-information originate always command?   A. It creates a stub area. B. It configures the device to advertise a default route regardless of whether it exists in the routing table. C. It configures the device to automatically redistribute a default route. D. It adds a static default route to the device configuration.   Correct Answer: B Explanation: default-information originate To generate a default Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 511-520

EnsurepassQUESTION 511 Which two options are ways in which an OSPFv3 router handles hello packets with a clear address-family bit? (Choose two.)   A. IPv4 unicast packets are discarded. B. IPv6 unicast packets are discarded. C. IPv4 unicast packets are forwarded. D. IPv6 unicast packets are forwarded.   Correct Answer: AD Explanation: A typical distance vector protocol saves the following information when computing the best path to a destination: the distance (total metric Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 501-510

EnsurepassQUESTION 501 Refer to the exhibit. You are configuring the S1 switch for the switch port that connects to the client computer. Which configuration blocks users on the port from using more than 6 Mbps of traffic and marks the traffic for a class of service of 1?     A. B. C. D.   Correct Answer: A Explanation: Only option A specified that the exceed and violate actions are set to drop for traffic over the CIR of 6 Mbps, and is also configured to set all Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 491-500

EnsurepassQUESTION 491 Refer to the exhibit. Which two issues can cause the interface VLAN10 to be down/down? (Choose two.)     A. The VLAN is inactive or has been removed from the VLAN database. B. STP is in a forwarding state on the port. C. A Layer 2 access port is configured with VLAN10, but is in a down/down state. D. The autostate exclude feature was used on interface VLAN10.   Correct Answer: AC   QUESTION 492 DRAG DROP Drag and drop the OSPF network type Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 471-480

EnsurepassQUESTION 471 DRAG DROP Drag and drop the IPv6 multicast feature on the left to its corresponding function on the right.     Correct Answer:     QUESTION 472 Refer to the exhibit. Which feature can R1 use to fail over from R2 to R3 if the address for R2 becomes unavailable?     A. Object tracking B. HSRP C. GLBP D. LACP   Correct Answer: A Explanation: The object tracking feature allows you to create a tracked object that multiple clients Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 481-490

EnsurepassQUESTION 481 Which three TLVs does LLDP use to discover network devices? (Choose three.)   A. Management address B. Port description C. Network policy D. System name E. Location information F. Power management   Correct Answer: ABD Explanation: Basic Management TLV SetThis set includes the following five TLVs used in LLDP: Reference: http://www.eetimes.com/document.asp?doc_id=1272069     QUESTION 482 Which option is a core event publisher for EEM? Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 461-470

EnsurepassQUESTION 461 How many bytes comprise the system ID within an IS-IS NET?   A. 4 bytes B. 6 bytes C. 8 bytes D. 16 bytes E. 20 bytes   Correct Answer: B Explanation: Routers are identified with NETs of 8 to 20 bytes. ISO/IEC 10589 distinguishes only three fields in the NSAP address format: a variable-length area address beginning with a single octet, a system ID, and a 1-byte n-selector. Cisco implements a fixed length of 6 bytes for the system ID, which is like Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 451-460

EnsurepassQUESTION 451 Which two options are actions that EEM can perform after detecting an event? (Choose two.)   A. Place a port in err-disabled. B. Generate an SNMP trap. C. Reload the Cisco IOS Software. D. Send an SMS.   Correct Answer: BC Explanation: action snmp-trap To specify the action of generating a Simple Network Management Protocol (SNMP) trap when an Embedded Event Manager (EEM) applet is triggered, use the action snmp-trap command in applet configuration mode. Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 441-450

EnsurepassQUESTION 441 Which two options are signaling protocols that are used in MPLS? (Choose two.)   A. LDP B. RSVP C. BFD D. LISP E. CLNS F. CDP   Correct Answer: AB Explanation: * Signaling is the means by which LSRs all along the path know that they are a part of a given LSP. It is a signaling function by which the LSR knows that the internal transit path for the LSP depicted goes from Interface 2 to Interface 4. * Label distribution is the means by which an LSR Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 431-440

EnsurepassQUESTION 431 Which two statements about the default behavior of IS-IS are true? (Choose two.)   A. The default IS-IS router type is L1/L2. B. The default IS-IS metric type is wide. C. The default IS-IS interface circuit type is L1/L2. D. By default, two IS-IS routers must use the same hello interval and hold timer in order to become neighbors.   Correct Answer: AC     QUESTION 432 Refer to the exhibit. Which statement is true?     A. The Read more [...]

[Free] Download New Updated (February 2016) Cisco 400-101 Practice Tests 421-430

EnsurepassQUESTION 421 Refer to the exhibit. R1 is performing mutual redistribution, but OSPF routes from R3 are unable to reach R2. Which three options are possible reasons for this behavior? (Choose three.)     A. R1 requires a seed metric to redistribute RIP. B. The RIP version supports only classful subnet masks. C. R1 is filtering OSPF routes when redistributing into RIP. D. R3 and R1 have the same router ID. E. R1 and R3 have an MTU mismatch. F. R2 is configured Read more [...]