[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 671-680

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 671 Drag the actions on the left to the correct order on the right when doing outside-to-inside NAT translation.     Correct Answer:     QUESTION 672 Drag the statements on the left to the correct OSPF network type on the right.     Correct Answer:     QUE STION 673 What is the purpose of an explicit "deny any" statement at the end of an ACL?   A. none, since it is implicit Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 661-670

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 661 Refer to the exhibit. What is preventing R4 from learning any networks via OSPF?     A. R4 does not have any OSPF neighbors. B. There is no OSPF backup designated router on FastEthernet0/0. C. The OSPF area number for FastEthernet0/0 does not match the interface network. D. There are no OSPF learned routes in the network beyond R4.   Correct Answer: A     QUESTION 662 Refer to the exhibit. Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 651-660

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 651 DRAG DROP Drag and drop the protocol on the left to the corresponding administrative distance on the right.     Correct Answer:     QUESTION 652 Which object tracking function tracks the combined states of multiple objects?   A. application B. interface C. stub-object D. list   Correct Answer: D     QUESTION 653 In which two situations is an EIGRP hello packet sent as Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 641-650

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 641 DRAG DROP Drag and drop each DHCP term on the left to the corresponding definition on the right.     Correct Answer:                                 QUESTION 642 DRAG DROP Drag and drop the EIGRP term on the left to the corresponding definition on the right.     Correct Answer:     QUESTION 643 Which statement Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 601-610

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 601 Which statement about WAN Ethernet Services is true?   A. Rate-limiting can be configured per EVC. B. Point-to-point processing and encapsulation are performed on the customer network. C. Ethernet multipoint services function as a multipoint-to-multipoint VLAN-based connection. D. UNIs can perform service multiplexing and all-in-one bundling.   Correct Answer: A Explanation: The MEF has defined a set Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 611-620

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 611 Refer to the exhibit. RIPv2 authentication is failing on a device with this configuration. Which two actions can you take to enable it? (Choose two.)     A. Set the RIP authentication mode to text. B. Set the RIP authentication mode to MD5. C. Configure the password encryption for the key. D. Set the password encryption to AES.   Correct Answer: AB Explanation: See the reference link below for Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 621-630

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 621 Which two options are EEM policies? (Choose two.)   A. applets B. event detectors C. scripts D. syslogs E. actions   Correct Answer: AC     QUESTION 622 Refer to the exhibit. Route exchange is failing on a PE edge device configured with this VRF-Lite. Which action can you take to correct the problem?     A. Configure the vrf-lite capability under the OSPF address families. Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 631-640

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 631 In an STP domain, which two statements are true for a nonroot switch, when it receives a configuration BPDU from the root bridge with the TC bit set? (Choose two.)   A. It sets the MAC table aging time to max_age + forward_delay time. B. It sets the MAC table aging time to forward_delay time. C. It recalculates the STP topology upon receiving topology change notification from the root switch. D. It receives Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 591-600

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 591 Refer to the exhibit. You are bringing a new MPLS router online and have configured only what is shown to bring LDP up. Assume that the peer has been configured in a similar manner. You verify the LDP peer state and see that there are no neighbors. What will the output of show mpls ldp discovery show?     A. Interfaces: Ethernet0/0 (ldp): xmit B. Interfaces: Ethernet0/0 (ldp): xmit/recv LDP Id: 25.25.25.2:0; Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 581-590

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 581 Refer to the exhibit. If OSPF is implemented on the network, which additional configuration is needed to allow traffic from host 10.4.1.15/24 to host 10.1.2.20/24?     A. A virtual link between router 2 and router 4 B. A virtual link between router 3 and router 4 C. A virtual link between router 2 and router 3 D. The current design allows traffic between the two hosts.   Correct Answer: D Explanation: Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 571-580

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 571 What is the maximum number of secondary IP addresses that can be configured on a router interface?   A. 1 B. 2 C. 4 D. 1024 E. 65535 F. no limit to the number of addresses   Correct Answer: F Explanation: From "IP Routing Frequently Asked Questions"   Q. What are the maximum number of secondary IP addesses that can be configured on a router interface? A. There are no limits on configuring Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 561-570

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 561 A configuration includes the line ip nbar port-map SSH tcp 22 23 443 8080. Which option describes the effect of this configuration line?   A. It configures NBAR to search for SSH using ports 22, 23, 443, and 8080. B. It configures NBAR to allow SSH connections only on ports 22, 23, 443, and 8080. C. It enables NBAR to inspect for SSH connections. D. It creates a custom NBAR port-map named SSH and associates Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 551-560

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 551 Which two options are valid for the number of bytes in a BGP AS number? (Choose two.)   A. 2 bytes B. 4 bytes C. 6 bytes D. 8 bytes E. 16 bytes   Correct Answer: AB Explanation: During the early time of BGP development and standardization, it was assumed that availability of a 16 bit binary number to identify the Autonomous System (AS) within BGP would have been more than sufficient. The 16 bit AS Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 541-550

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 541 DRAG DROP Drag and drop the path-selection criteria on the left into the correct route-selection order on the right, that a router will use when having multiple routes toward the same destination.     Correct Answer:                       QUESTION 542 DRAG DROP Drag and drop the argument of the mpls ip cef load-sharing command on the left to the function it Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 501-510

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 501 Refer to the exhibit. You are configuring the S1 switch for the switch port that connects to the client computer. Which configuration blocks users on the port from using more than 6 Mbps of traffic and marks the traffic for a class of service of 1?     A. B. C. D.   Correct Answer: A Explanation: Only option A specified that the exceed and violate actions are set to drop for traffic over the Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 521-530

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 521 Which option describes the effect of the OSPF default-information originate always command?   A. It creates a stub area. B. It configures the device to advertise a default route regardless of whether it exists in the routing table. C. It configures the device to automatically redistribute a default route. D. It adds a static default route to the device configuration.   Correct Answer: B Explanation: Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 511-520

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 511 Which two options are ways in which an OSPFv3 router handles hello packets with a clear address-family bit? (Choose two.)   A. IPv4 unicast packets are discarded. B. IPv6 unicast packets are discarded. C. IPv4 unicast packets are forwarded. D. IPv6 unicast packets are forwarded.   Correct Answer: AD Explanation: A typical distance vector protocol saves the following information when computing the best Read more [...]

[Free] 2017 Ensurepass Testinsides Cisco 400-101 Actual Test 531-540

EnsurepassCCIE Routing and Switching Written Exam v5.0   QUESTION 531 MPLS LDP IGP synchronization is configured on a link. The OSPF adjacency on that link is UP but MPLS LDP synchronization is not achieved. Which statement about this scenario is true?   A. The router excludes the link from its OSPF LSA type 1. B. The router flushes its own router LSA. C. The router advertises the link in its router LSA with max-metric. D. The router advertises an LSA type 2 for this link, Read more [...]