Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 241-250

Ensurepass  QUESTION 241 Refer to the exhibit. Which option is valid for connecting the fabric interconnect to the I/O module?   A. A, B, C, and D are valid. B. A and B are valid. C. A, B, and D are valid. D. Only A is valid.   Correct Answer: B     QUESTION 242 Refer to the exhibit. Assume that the Cisco UCS 6200 Series Fabric Interconnects are equipped with 16 port expansion modules. What is the impact of the last command in the exhibit?     Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 221-230

Ensurepass  QUESTION 221 Refer to the exhibit. Which two options describe possible causes of the failure shown in the exhibit? (Choose two.)     A. Two switches have the same zone set name, but different zone names and different zone members. B. Two switches have the same zone set name and zone name, but different zone members. C. The zoneset export interface command is used for the wrong interface. D. The zoneset merge command can only be executed for VSAN 1. E. Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 231-240

Ensurepass  QUESTION 231 Which two methods can be used in communications between the Cisco Nexus 1000V VEM and the VSM? (Choose two.)   A. routed TCP traffic using HTTPS B. routed UDP traffic using port 4785 C. routed UDP traffic using port 7845 D. Layer 2 direct traffic using MAC addresses E. Layer 2 broadcast traffic F. routed TCP traffic using port 4785 G. routed TCP traffic using port 7845   Correct Answer: BD     QUESTION 232 Refer to the exhibit. Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 201-210

Ensurepass  QUESTION 201 Which PIM mode is supported in Cisco NX-OS?   A. sparse mode B. dense mode C. sparse-dense mode D. dense-sparse mode   Correct Answer: A     QUESTION 202 Refer to the exhibit. Which configuration command (or commands) will produce the output that is shown in the exhibit?     A. no feature igmp B. no feature igmp snooping C. vlan 201 no ip igmp snooping D. vlan configuration 201 no ip igmp snooping E. interface Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 211-220

Ensurepass  QUESTION 211 Which two types of multicast trees are supported by Cisco NX-OS? (Choose two.)   A. private trees B. shared trees C. unicast trees D. anycast trees E. unidirectional trees F. bidirectional trees   Correct Answer: BF     QUESTION 212 Refer to the exhibit. The engineer needs to check if keepalive messages between two servers in the address range 9.9.9.0/24 arrive from the device that is directly connected via the trunk interface. Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 181-190

Ensurepass    QUESTION 181 How many concurrent GUI logins are possible per user account on Cisco UCS Manager?   A. 128 B. 96 C. 64 D. 32   Correct Answer: D     QUESTION 182 ACE can check the health of servers and server farms by configuring health probes (sometimes referred to as keepalives). There are several types of probes. Which three options are valid ACE probes? (Choose three.)   A. TCP B. ICMP C. HTTP D. IPsec   Correct Answer: Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 191-200

Ensurepass  QUESTION 191 What are two benefits of a FabricPath network? (Choose two.)   A. Simplicity of configuration B. Automatic OSPF routing C. Scalability D. Dynamic link selection E. Spanning tree loop prioritization.   Correct Answer: AC         QUESTION 192 Refer to the exhibit. Which of these technologies is illustrated by the topology in the exhibit?     A. vPC+ B. standard vPC C. enhanced vPC D. express vPC Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 171-180

Ensurepass  QUESTION 171 When testing ICMP access to a functional load-balancing ACE VIP, it fails. What is the reason of this problem? (Choose two.)   A. The interface is shut down B. An access list is denying ICMP C. Routing is not configured properly D. vip icmp-reply is inactive   Correct Answer: BD     QUESTION 172 Which GSS "source access list" is used to allow access to GSS by clients when GSS is being used as the DNS?   A. Client IP B. Proxy Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 161-170

Ensurepass  QUESTION 161 Refer to the exhibit. According to the equipment tab in Cisco UCS Manager, which is true?     A. A is an uplink port, B is a fabric port, C is a server port, D is a backplane port, E is a DCE interface, and F is a vNIC B. A is an uplink port, B is a server port, C is a fabric port, D is a backplane port, E is a DCE interface, and F is a vNIC C. A is an uplink port, B is a fabric port, C is a backplane port, D is a server port, E is a DCE interface, Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 151-160

Ensurepass HOT EXAM! 100-105 Dumps VCE PDF 200-105 Dumps VCE PDF 300-101 Dumps VCE PDF 300-115 Dumps VCE PDF 300-135 Dumps VCE PDF 300-320 Dumps VCE PDF 400-101 Dumps VCE PDF 640-911 Dumps VCE PDF 640-916 Dumps VCE PDF 70-410 Dumps VCE PDF 70-411 Dumps VCE PDF 70-412 Dumps VCE PDF 70-413 Dumps VCE PDF 70-414 Dumps VCE PDF 70-417 Dumps VCE PDF 70-461 Dumps VCE PDF 70-462 Dumps VCE PDF 70-463 Dumps VCE PDF 70-464 Dumps VCE PDF 70-465 Dumps VCE PDF 70-480 Dumps VCE PDF 70-483 Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 141-150

Ensurepass  QUESTION 141 Given the following output:   san-port-channel 12 is up   Hardware is Fibre Channel   Port WWN is 24:0c:00:0d:ec:d3:5c:00   Admin port mode is NP, trunk mode is on   Port mode is NP   Port vsan is 1   Speed is 8 Gbps   Member[1] : fc2/3   Member[2] : fc2/4   What does "Speed is 8 Gbps" indicate?   A. The speed of the slowest interface in the port channel B. The combined speed of all interfaces configured Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 131-140

Ensurepass  QUESTION 131 When creating a QoS policy dialog box in Cisco UCSM, which four fields can be modified? (Choose four.)   A. name B. best-effort C. burst D. rate E. host control   Correct Answer: ACDE     QUESTION 132 Which policy determines what happens to local data and to the BIOS settings on a server during the discovery process and when the server is disassociated from a service profile?   A. boot policy and BIOS policy B. disk scrub Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 111-120

Ensurepass HOT EXAM! 100-105 Dumps VCE PDF 200-105 Dumps VCE PDF 300-101 Dumps VCE PDF 300-115 Dumps VCE PDF 300-135 Dumps VCE PDF 300-320 Dumps VCE PDF 400-101 Dumps VCE PDF 640-911 Dumps VCE PDF 640-916 Dumps VCE PDF 70-410 Dumps VCE PDF 70-411 Dumps VCE PDF 70-412 Dumps VCE PDF 70-413 Dumps VCE PDF 70-414 Dumps VCE PDF 70-417 Dumps VCE PDF 70-461 Dumps VCE PDF 70-462 Dumps VCE PDF 70-463 Dumps VCE PDF 70-464 Dumps VCE PDF 70-465 Dumps VCE PDF 70-480 Dumps VCE PDF 70-483 Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 121-130

Ensurepass  QUESTION 121 Why is a Cisco UCS B250 server unable to support 16-GB DIMMs?   A. Dual-rank DIMMs are not supported. B. 16-GB DIMMs are too slow. C. The largest DIMM an Intel 55xx or 56xx CPU can address is 32 GB. D. The memory bus would be too long. E. The blade would run too hot.   Correct Answer: C     QUESTION 122 On a Cisco UCS B250 M2 server that is fully populated with 1333-MHz memory and an E5640 CPU, what is the fastest speed the memory Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 101-110

Ensurepass  QUESTION 101 A VSM is actually a virtual machine that requires how many vNICs for functioning?   A. 0 B. 1 C. 2 D. 3 E. 4   Correct Answer: D       QUESTION 102 When configuring vPC-HM CDP with multiple links to the same switch, are port-channels required?     A. Each link between the upstream switch and the VEM is an individual subgroup. B. Connections that go to the same upstream switch must be configured with the command Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 91-100

Ensurepass  QUESTION 91 Which command is used to determine if a host has logged in to the Fibre Channel fabric?   A. show flogi database B. show system fc login C. show npv flogi-table D. show npv fcns database E. show interface vfc X flogi F. show interface flogi   Correct Answer: A     QUESTION 92 Traffic drop for FCoE is experienced across a Nexus 5548 switch. What is a possible cause?   A. Server's CNA does not support DCBX and PFC TLV was Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 81-90

Ensurepass  QUESTION 81 Which two Fibre Channel features are not supported in Cisco Nexus 5500 and Nexus 5000 platforms? (Choose two.)   A. port security B. fabric binding C. IVR D. port tracking E. FICON   Correct Answer: CE     QUESTION 82 Refer to the exhibit. Given this FCoE topology, host VFC interface and FC storage are in the same VSAN (VSAN 10). The VSAN is in the allow list for both ISLs. Both ISLs are up at 4 GB. Which command can be issued on the Read more [...]

Download New Updated (Spring 2015) Cisco 350-080 Actual Tests 61-70

Ensurepass  QUESTION 61 Which three statements best describe multicast operation on Cisco Nexus switches in a data center? (Choose three.)   A. Cisco NX-OS Software does not support PIM dense mode. B. The command ip multicast-routing must be enabled in Cisco NX-OS Software before any multicast configuration is possible on the switch. C. PIM CLI configuration and verification commands are not available until you enable the PIM feature with the feature pim command. D. Cisco Read more [...]