2013 Latest CCNA Voice 640-461 Real Exam Question 41-45

Ensurepass

QUESTION 41
What is the maximum number of phones are supported on Call Manager Express?
A. 48
B. 28
C. 240
D. 500
Correct Answer: C Section: CUCME Explanation
Explanation/Reference:
The maximum number of phones supported depends on the Cisco router you have chosen to use in your
CME deploymnet.
Cisco is referring to the Cisco 3845 router which can support a maximum of 240 IP phones.

Supported Platforms and Memory Specifications: SCCP IP Phones*

Cisco Platform -Maximum Total IP Phones

Cisco IAD 2430 -24
Cisco 1751-V -24
Cisco 1760, Cisco 1760-V -24
Cisco 261xXM, 262xXM -36
Cisco 2650XM, 2651XMx -48
Cisco 2691 -72
Cisco 2801 -24
Cisco 2811 -36
Cisco 2821 -48
Cisco 2851 -96
Cisco 3725 -144
Cisco 3745 -192
Cisco 3825 -168
Cisco 3845 -240

Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/requirements/guide/cme34spc.html

QUESTION 42
In Cisco Unified Communications Manager Native Presence, what two things is a watcher monitoring in real time? (Choose two.)
A. registration status of a specific IP phone
B. registration status of the hunt group
C. registration status of the MGCP gateway
D. registration status of Cisco Extension Mobility of the IP phone
E. status of a registered directory number
Correct Answer: AE Section: CUCM Explanation
Explanation/Reference:
RTMT provide the following reports , Call Activity Status, Device Status, server status, Service Status, Alert Status & Performance Protection Report
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/6_0_1/rtmt/rtintro.html

QUESTION 43
Which protocol is used for communication between Cisco Unity Express and Cisco Unified Communications Manager Express?
A. H.323
B. G.711
C. MGCP
D. Q.931
E. SIP
Correct Answer: E Section: CUCM Explanation
Explanation/Reference:
Figure 14-3 Protocols Used Between Cisco Unity Express and Cisco Unified CallManager
Figure 14-3 illustrates the following signaling and media flows:
.
Phones are controlled via SCCP from Cisco Unified CallManager.
.
Cisco Unity Express is controlled via JTAPI (CTI-QBE) from Cisco Unified CallManager.
.
The Message Waiting Indicator (MWI) on the phone is affected by Cisco Unity Express communicating a change of mailbox content to Cisco Unified CallManager via CTI-QBE,
and by Cisco Unified CallManager in turn sending a MWI message to the phone to change the state of the lamp.
.
The voice gateway communicates via either H.323, SIP, or MGCP to Cisco Unified CallManager.
.
Real-Time Transport Protocol (RTP) stream flows carry the voice traffic between endpoints.
Figure 14-4 shows the protocols involved in the call flow between the SRST router and Cisco Unity Express when the WAN link is down.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/4x/42unityx.html

QUESTION 44
Refer to the exhibit. The error message was displayed when the administrator attempted to set the default user password in the user template to four digits long. Which option can rectify this issue?
A. The minimum password length in Cisco Unity Connection should be at least five digits long.
B. The password length needs to be configured under the Authentication Rules settings using the Minimum Credential Length configuration field.
C. The password length needs to be configured under the user template settings using the Minimum Credential Length configuration field.
D. The password length cannot be adjusted under the user template; the password length can only be adjusted under the individual users.
Correct Answer: B Section: CUCM Explanation
Explanation/Reference:
A minimum length requirement (as set on the Edit Authentication Rule page, in the Minimum Credential Length field)
.
Inclusion of at least one character from each of the following categories: upper-case letter, lowercase letter, number, and symbol (~ ! @ # $ % ^ & * ” ` , . : ; ? – _ ( ) [ ] < > { } + = / )
.
No characters repeated consecutively more than three times (for example, aaaaB1C9 is invalid)
.
No inclusion of the alias or name of the administrator

QUESTION 45
What is the correct URL to use to add a user to Cisco Unified Communications Manager Express?
A. http://ipaddress/cucme.html
B. https://ipaddress/cue.html
C. https://www.ipaddress/cme.html
D. http://ipaddress/ccme.html
E. http://ipaddress/cme.html
Correct Answer: D Section: CUCME Explanation
Explanation/Reference:
CCME C Cisco call manager express
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmegui. html#wp1069477

Ensurepass offers Latest 2013 640-461 Real Exam Questions , help you to pass exam 100%.