2013 Latest CCNA Voice 640-461 Real Exam Question 36-40


How can an administrator determine which codec is being used between two endpoints while a call is in progress?
A. Run the codec trace in Cisco Unified Communication Manager.
B. Use Cisco Unified Serviceability network trace.
C. Can only be seen in Cisco SDI traces.
D. Can only be seen in a sniffer trace.
E. Press the [ ? ] button twice on one of the IP phones.
Correct Answer: E Section: IP Phone Explanation
Pressing the button (?) twice in quick succession during an active call. The display shows you receive and transmit statistics for the call
Link: http://docwiki.cisco.com/wiki/Cisco_Unified_Communications_–_One-Way_Audio

An administrator wants to see how long a specific IP phone extension is in use during a given period of time. What CAR tool feature would the administrator use?
A. System Reports > Traffic > Summary by Phone Number
B. CDR > Search > By Call Precedence Level
C. Device Reports > Route Patterns/Hunt Groups > Route and Line Group Utilization
D. User Reports > Top N > By Duration
Correct Answer: A Section: CUCM Explanation
Only CAR administrators generate the Traffic Summary by Phone Number report. The report provides information about the call volume for a period and set of phone numbers that you specify.
Choose System Reports > Traffic > Summary By Phone Number.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_6_1/car/carsytra.html

Which three commands does Cisco recommend to use first when setting up phones for Cisco Unified Communications Manager Express? (Choose three)
A. Load
B. Max-dn
C. Keepalive
D. Max-ephones
E. Create cnf files
F. Telephony-service
Correct Answer: BDF Section: CUCME Explanation
Basic Manual CME Setup Using the CLI
Router(config)# telephony-service -Enters telephony-service configuration mode.
Router(config-telephony-service)# max-ephones 24 -Sets the maximum number of
supported IP phones.
Router(config-telephony-service)# max-dn 48 -Sets the maximum number of extensions.
NOTE: The maximum number of phones and extensions is platform and IOS version dependent.
Router(config-telephony-service)# load 79xx P0xxxxxxxxxx -Identifies the Cisco IP
phone firmware file to be used by specific Cisco IP phones when they register.
Router(config-telephony-service)# ip source-address -Identifies the IP
address and port number for IP phone registration.

NOTE: The default port is 2000.

Router(config-telephony-service)# create cnf-files -Builds the XML configuration files
required for Cisco CME phones.
Router(config-telephony-service)# reset sequence-all -Resets all phones one at a time.
Router(config-telephony-service)# exit -Returns to global configuration mode.


What statement about the Cisco Unity Express AIM Module and the Cisco Unity Express Network Module is true?
A. The AIM module takes up a router slot whereas the network module does not.
B. The network module takes up a router slot whereas the AIM module does not.
C. The AIM module runs the Linux OS whereas the network module runs the Cisco IOS software.
D. The network module requires the Cisco Unified Communications Manager Express to be preconfigured whereas the AIM module does not.
Correct Answer: B Section: Unity Connection Explanation
Explanation/Reference: AIM – AIMs are modules that you install inside a compatible router. Think of an AIM as an internal expansion card like for your computer. You can get AIMs that do different things like VPN acceleration
Network Module – The network module takes up a router slot on the router.
Cisco Access Routers and Cisco Network Modules
The Cisco network modules described in this document are supported on the following Cisco routers:
Cisco 2600 series, including the Cisco 2610, Cisco 2610XM, Cisco 2611, Cisco 2611XM, Cisco 2612, Cisco 2613, Cisco 2620, Cisco 2620XM, Cisco 2621, Cisco 2621XM, Cisco 2650, Cisco 2650XM, Cisco 2651, Cisco 2651XM, and Cisco 2691 routers
Note: References to the Cisco 2600XM routers apply to the following routers: Cisco 2610XM, Cisco 2611XM, Cisco 2620XM, Cisco 2621XM, Cisco 2650XM, and Cisco 2651XM.
Cisco 2811, Cisco 2821, and Cisco 2851 routers
Cisco 3600 series, including the Cisco 3620, Cisco 3631, Cisco 3640, Cisco 3640A, Cisco 3661, and Cisco 3662 routers
Cisco 3700 series, including the Cisco 3725 and Cisco 3745 routers
Cisco 3800 series, including the Cisco 3825 and Cisco 3845 routers
Cisco MWR 1941-DC routers
Cisco 2900 series and Cisco 3900 series routers support some network modules with the addition of a network module adapter. See “Using Network Modules in Service Module Slots” section.
For information on these Cisco routers, see the hardware documentation described in the “Related Documents” section.
Cisco 3660 Router Rear View
1 – Network module slot 2 4 – Network module slot 1 2 – Network module slot 4 5 – Network module slot 3 3 – Network module slot 6 6 – Network module slot 5
Chassis Slot Locations in Cisco 2851 Routers 1 – High-speed WAN interface card slot 0 4 – High-speed WAN interface card slot 3 2 – High-speed WAN interface card slot 1 5 – Extension module slot 3 – High-speed WAN interface card slot 2 6 – Network module slot Sample 1-Slot Network Module
1 – Interface card slot 0 Sample 2-Slot Network Module
1 – Interface card slot 1 2 – Interface card slot 0
Link: http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/OvrNetM.html

The SBB Company is setting up Call Transfer for its Cisco Unified Communications Manager Express solution. The company uses five-digit extensions and would like to be able to transfer calls outside the network to the CEO’s home. The CEO’s telephone number is 866-555-2222.
Which configuration command will allow this to occur?
A. SBB(config-ephone-dn)# transfer-pattern .T
B. SBB(config-telephony-service)# transfer-pattern .T
C. SBB(config-ephone-dn)# transfer-pattern ……51212
D. SBB(config-ephone-dn)# transfer-pattern 8665552222
E. SBB(config-telephony-service)# transfer-pattern 86655…..
F. SBB(config-telephony-service)# transfer-pattern 8665552222
Correct Answer: F Section: CUCME Explanation
Configuring CME Transfer Patterns to allow Outside Transfers
CME_Voice(config)# telephony-service CME_Voice(config-telephony)# transfer-pattern ?
WORD digit string pattern for permitted non-local call transfer CME_Voice(config-telephony)# transfer-pattern 8665552222

Ensurepass offers Latest 2013 640-461 Real Exam Questions , help you to pass exam 100%.