2013 Latest CCNA Voice 640-461 Real Exam Question 126-130

Ensurepass

QUESTION 126
Which report in Cisco Unified Reporting should you use to track the number of users with one or more phones?
A. Unified CM User Device Count
B. Unified CM Device Distribution Summary
C. Unified CM Table Count Summary
D. Unified CM Data Summary
Correct Answer: A Section: CUCM Explanation
Explanation/Reference: Unified CM reports
Unified CM User Device Count – Provides information about associated devices; for example, this report lists the number of phones with no users, the number of users with one phone, and the number of users with more than one phone.
Unified CM Device Distribution Summary – Provides a summary of how devices are distributed throughout the cluster; for example, this report shows which devices are associated with the primary, secondary, tertiary servers, and so on.
Unified CM Data Summary – Provides a summary of data that exists in the Unified CM database, according to the structure of the menus in Unified CM Administration. For example, if you configure three credential policies, five conference bridges, and ten shared-line appearances,
you can see that type of information in this report.
Unified CM Table Count Summary – Provides a database-centric view of data. This report proves useful
for administrators or AXL API developers that understand database schema.

Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/9_1_1/report/
CUCM_BK_CBFC5C9C_00_cisco-unified-reporting-administration-91_chapter_011.html

QUESTION 127
Which Cisco IOS CLI command should you use to perform an IP phone cold reboot?
A. router(config-ephone)# reset
B. router(config-ephone)# restart
C. router(config-ephone-dn)# restart
D. router(config-phone)# reset
Correct Answer: A Section: CUCME Explanation
Explanation/Reference:
Router> enable Router# configure terminal Router(config-ephone)# reset Router(config-ephone)# end
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmereset.html

QUESTION 128
By default, how many failed attempts at signing into Cisco Unity Connection is a user allowed before their account is locked out?
A. 2
B. 3
C. 4
D. 5
E. 6
F. No limit
Correct Answer: B Section: Unity Connection Explanation
Explanation/Reference:
Edit Authentication Rule

Failed Logon Attempts:

Enter the number of failed logon attempts after which users cannot access Cisco Unity Connection.
When set to 0 (zero), there is no limit to the number of failed logon attempts, and the user is not locked out
of the account.
Default setting: 3 attempts.

Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/7x/gui_reference/guide/7xcucgrg100.html

QUESTION 129
When you reset an IP phone via the Cisco Unified Communications Manager Administration page, which method briefly shuts down a registered phone and brings it back up?
A. drop
B. restart
C. reset
D. shutdown
E. shut & no shut
Correct Answer: C Section: IP Phone Explanation
Explanation/Reference:
reset Command————>Takes longer to process when updating multiple phones.

reset – Performs a reboot of the specified phone or all phones running SCCP associated with
this Cisco Unified CME router. Does contact the DHCP server for updated information

restart Command———->Faster processing for multiple phones.

restart – Performs a fast reboot of the specified phone or all phones running SCCP associated with
this Cisco Unified CME router. Does not contact the DHCP server for updated information

Link:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmereset.
html#wpxref87974

QUESTION 130
Which generating QoS reports CAR tool, what two parameters are valid for report generation? (Choose two)
A. route Iists
B. route pattrens/hunt pilots
C. route groups
D. gateway types
E. partitions
F. IP phone directory numbers
Correct Answer: BD Section: QoS Explanation
Explanation/Reference:
Configuring Route Pattern and Hunt Pilot Device Reports
Only CAR administrators generate the Route/Hunt List Utilization report. The Route/Hunt List Utilization report provides an estimate of the maximum utilization percentage of the route/hunt list (cumulative utilization of all the gateways under the route/hunt list) for the period and not the exact utilization. The system calculates the cumulative utilization of all the gateways under the route lists and all the lines under the hunt lists.
You can examine the usage based on each hour of a day or on a specified number of days for each week or month. Reports generate for each of the selected route/hunt lists.
You can either view reports that the system automatically generates or generate new reports. Only CAR administrators can schedule reports for automatic generation.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/8_6_1/car/cardvrou.html
Configuring QoS System Reports
CAR provides reporting capabilities for three levels of users:
.
AdministratorsGenerate system reports to help with load balancing, system performance, and troubleshooting.
.
ManagersGenerate reports for users, departments, and QoS to help with call monitoring for budgeting or security purposes and for determining the voice quality of the calls.
.
Individual usersGenerate a billing report for calls by each user.
Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/service/7_0_1/car/carsyqos.html

Ensurepass offers Latest 2013 640-461 Real Exam Questions , help you to pass exam 100%.